Separate names with a comma.
Anyone try this? https://www.neptunianskyllc.com/product-page/bilge-b-dry-mobile
Ditto. For 7.4s this is the only nmea 2k interface that I'm aware of. It's a terrific product.
I installed two l16 agms between the two center stringers a little forward of the water lift mufflers. Used the yacht club crane to drop them in....
Well, I stand corrected.
According to this, a standard Searay Sundancer 320 carries a Class B CE Certification (which is actually an EU standard)....
Is any sundancer a category B vessel? As an owner of a 340 that I regularly take offshore, I wouldn't be caught dead in anything close to category...
Not normal. You either have a bad float switch or a water intrusion issue, either of which should be investigated and remedied sooner rather than...
That's the next step. Going to try it as is for a bit though
Installed where the TV antenna used to be.
Can't help you with that one.
I bought g4 chain rode combo at darkhorse marine (80 ft chain 200 ft rode). Works great.
5/16th. I just replaced mine.
The 8.1s are great engines.
A good primer. https://www.boatus.com/expert-advice/expert-advice-archive/2017/february/inspecting-exhaust-manifolds-and-risers. Doesn't apply...
With the 8.1s, the risers are stainless. They've had issues with pinhole leaks, so have them inspected, but they are not necessarily subject to...
I had a 2800 Maxum with the 7.4 mpi and Biii drive. Following rebuild, the thing would not go over 3000 rpm. We tried everything. One night...
Google the part number and you'll find various cross reference sites.
I've got the older version