Separate names with a comma.
He is showing 8.1 motors in his signature, they are injected.
The clear diaphragm models are usually the "on demand" style compressor powered horns. (small compressor directly connected to the horn) They...
It's probably too late to save your weekend but the main panel is on the bulkhead that divides the engine room from the lazarette (port side just...
When I pulled my subzero's out I needed to remove the wooden "floor insert" in order to gain enough clearance. The flooring that you see, is...
+1 on the Bucket Head. I've used mine in a 100% marine environment for at least four years in the bilge and it's still running.
You may also want to consider using a diesel fuel treatment to help with any potential algae growth. I use Biobor JF.
I spent 20+ years in the U.S. Navy, I call the stringy tying up thingies all kinds of different names to confuse some of those purists. It was...
Both fans should be pulling from the engine area and push it through the vents. (At least that's how it worked on mine.) You should be able to...
May want to look at drawstring sheets as well, they worked well on my 360DA.
There were interior changes thru the run of the 480s. I think the first year they may have used Vitricore laminates which have issues if the...
I replaced mine @ 15 years (in 100% saltwater) just for peace of mind. If you are already in there doing the manifolds, the elbows are no more...
My 360DA had enough room to walk (sideways) between the engines. I don't know how anyone does the maintenance on 340s or 320s without...
Try to make your next boat, your last, two foot-itis can get expensive!
Vince, my 480 has Cummins, but a friend of mine has a 58 with the 900 MAN engines. All parts are more expensive and the 1000 hr check is about 10K...
Luckily the '03 360 didn't have the cool fuel Gen III issue, so you don't need to go down that rabbit hole. But, I if I recall correctly, there...
How do the transmissions sound at idle? (I'm asking because these engines don't tell you much when it is down one cylinder due a plug or wire.) If...
No distributor on the 8.1 motors.
Yep, that's why (pretzel imitation, I call it boat yoga) it's best to swap it out while you are already back there and have it all opened up. It...
I saw one picture near dusk after the house had split off from the forward section of the hull. The generator still running as the lights were on!
Oops, sorry, I didn't refresh my window that had been open for a while before I replied. I had been considering cannon plugs for certain items...
