Separate names with a comma.
Currently they offer a plug in hybrid wrangler, I’ve seen $65k asking prices on them.
It’s very possible. Just hire a hauler. It’ll be cheaper than buying and maintaining an appropriately sized trailer.
These posts come up every year. No power to anything.
Dig around the wire harness at the batteries. There may be a small ground wire that got...
Try the Mercury parts manual online...
That’s a lot of repair work. Could be as simple as a couple of crossed plug wires on the port motor.
My older brother told me around here, they posted prices for 1/2 gallon back when it went over $1.00 and the pumps didn’t have space for the extra...
For future reference, once fluid appears at the upper plug, it takes me about 90 pumps to fill the reservoir from there.
Do you mean 2.5’-3’?? Or are you actually in 3” of water.
check depth with a stick and make sure your transducer is adjusted as you want
Agreed. You don’t need to be an expert know it all marine mechanic, but you should be an expert with your own boat.
If it’s DTS equipped, the “throttle only” button is right near the starter button and can be accidentally engaged
You should hear a few beeps...
If you do decide to sell, it’ll be gone quick. A fresh water 260 Sundeck is a dream boat for so many of us.
Trailering the boat is a lot of work.
Are there any dry storage places by you?
Some places have a 2 drink minimum….
Pirate has a 3 post minimum.
Same here. The look on his face when I replied “ this boat is pretty good on gas, we get about 2 1/2 miles per gallon”!
There is an actual mercury part number for it.
I’ve seen $6.75 for diesel on land around here.
FYI for future reference the Great Lakes 101060 strap eyes are an exact replacement.
Mine didn’t happen with heat.
Once the switch failed, I got the “shift error return to port” message. This happened 3 seconds after shifting from...
It could also be the purpose of the plug, to prevent bilge water from coming forward.
Try this. I had the same issue on my 2007 350 MAG with DTS.
possibly a bad neutral switch....