Separate names with a comma.
Spoke to rep on phone. He said that Pro Cut and Bubble gum are actually two separate one-step applications depending on the condition of your...
Information on side of bottle says Cleaner/Wax also not to apply in direct sunlight? Did you ever apply outside? Have you done the Pro-Cut -...
I know-I appreciate everyone's input. I'm sure I'm over analyzing this! Normally I'd already been done but my marina can't launch me till late...
Is this the process you suggested since I only have the rotary? One pass with Elevate on white pad with rotary and then second pass with Ignition...
Looks great Ryan! I'm considering the same process however I'm not sure I'm going to start with Restructure but go to Elevate. Since you did...
Contacted one of your associates re product recommendations. He suggested the Gel Coat on white wool with rotary followed by Maxfinishing with...
I do not own the Flex forced rotation. Is there a non-forced rotation polisher that you might suggest with the orange pad to remove swirl marks?...
You did a 35' boat with a 3" DA orbital? You did a 35'boat with a 3" DA orbital? Why not a larger 5-6" DA?
You used a DA orbital with a wool pad or a rotary? If DA what make/model because I didn't think the DA's were powerful enough for wool pads. Was...
Considering changing my compound/polish/wax process this year. Narrowed choices to Starke and Presta lines. I have a dewalt rotary and my hull is...
Do you only use Elevate now? (vs Elevate and Ignition) Do you do a two step process with Elevate- white wool followed by yellow? What's your pads...
What made you switch to Starke from Smooth? What type of machine did you use? Can't tell in the picture if that's a rotary or random orbital. You...
Thanks for all the help! I have the Dewalt rotary. I think it's comparable to the makita. Do you use wool pads like the softer yellow, green or...
Do you normally just use the ultra cutting cream or ultra cutting cream light. Do you finish with the ultra polish, like a 2 step process? Do use...
I am considering this Presta process on my 330 Dancer. My hull is in good shape but needs more shine. Is the Supercut too aggressive? Have you...
Considering switching to Presta this season. What process did you you use for these great results?
Looking to make a change this year on 330 Dancer with very slight oxidation. Considering Presta and Starke. See you've used Presta. I only have a...
So you used Elevate on a rotary w/white wool pad and followed with the Ignition also on a rotary with the 3m black foam pad? How was the final...
I am also considering the switch to Starke this year. My concern is applying the Ignition. I only have the Dewalt rotary. Did you apply Ignition...
