Separate names with a comma.
This far up north, the winters are long. Boating is a big part of our lives and we are fortunately close enough to the coast that we can push the...
Sat down for a few episodes of this out on Prime on the weekend. Based on actual events involving Dr. Christopher Duntsch. Pretty messed up....
On the list of to do's this winter is installing a head. Our boat came with a suitcase style one that was pretty much useless and just a waste of...
Have a 14' inflatable jet boat that I am looking to set up to tow at around 22 knts. Weighs under 300 lbs without the motor. Planning to pack that...
Have a 260 Mercruiser with a Bravo 2. The raw water pump is driven with the single serpentine belt which also drives all the other accessories. It...
We pushed hard through a rough inflow (3-4') last weekend and had some gear get wet in the bow. It appeared to be coming in behind the rub rail....
Have a 1996 B2 which developed an issue with getting locked in forward after a long cruise. Initially broke the helm cable trying to get it back...
Just noticed it in the title and am curious.
Am in the process of replacing stringers. Have a friend who has a large contract using BASF 2lb insolation who has offered to fill in all the...
Replacing the stringers and motor mount supports due to soft/wet wood. Was some of the black rot in the starb side and bulkhead. The boat has a...
A first for me so thought I would share. Live in the north and my boat spends about 5 mos/year winterized under a well vented and framed tarp. I...
Sad story but one that should be shared throughout the boating community....
Opening up the season for 2017. Hope you southern friends can appreciate what us northerner's have to sometimes deal with to get on the water....
Looking to add a pulpit and windlass to an older 24.5'. Would like to find a shorter version or possibly even just a SS roller setup. Will...
Looking to do something with my anchor set up and hoping to get some suggestions on what my options are. The boat is being set up for our intended...
Have updated the 5.7 in my boat from an '81 to a '97 with the Thunderbolt IV ignition system. It has been a pretty strait forward swap as far as...
Does anyone have available or know where I can find a set of 80 deg 4" exhaust elbows? The set I have are 3"x4". Not having much luck with it....
Upgraded my engine and need some help with mounting the raw water pump. Original engine had v-belts and the newer one has a serpentine. Came...
Hope this doesn't come across as a stupid question. I have an older Sea Ray ('81) which has several chips and scrapes on the keel from loading...
Am setting up a second boat and having to purchase everything but the unit itself so I can swap mine between them. Wondering if anybody has had...
