RL80C+/Plus firmware

JediJD

Active Member
TECHNICAL Contributor
Feb 14, 2009
1,361
Cartersville, GA
Boat Info
'07 42SS Carver, full electronics array
'03 380DA, RL80C+, ST7001, Kohl 7.3,4kw o/array sold
Engines
8.1S Crusader express drives
I have been a general fan of Raymarine over the years and I as a capitalist, I guess I can't complain about being charged $75 for a firmware upgrade from V2.09 to V4.11 (although I thought updates to firmware have historically not been this expensive). I am hacked that I was charged an additional $12.50 "shipping and handling" to send the firmware update on basically an SD card.

I'm curious...does anyone know if these things are single use or not?
 
I have RL80CRC HSB2 plus I guess, not sure about the (+), but the rest I am sure about. and I have the depth finder with it. What does you manual state?

I opted out of the firmware upgrade as all is working, and I could not find what it would do, that plus the expense. maybe if something acts up I wilk try the firmware upgrade.

:thumbsup:
 
Jed, I can't answer your question for sure. But having had problems when I updated my Smartcraft SC5000 and our RL 70 display, I would recommend you check with Mercruiser if you have a NMEA 0183 interface to the Smartcraft SystemView, RM and SC don't play nice with each other.

Barlow

Yes, Depending on actual RL model. The radar only display I don't think so, but yes for the chartplotter/GPS capable units. You need to have a DSM module and appropriate fishfinder capable transducer. Transducer plugs into DSM and DSM connects to RL display. If you just want depth you can also connect to a RM ST 40/60/70 depth display and transducer via SeaTalk connection.

Henry
 
.....I'm curious...does anyone know if these things are single use or not?

Legally?....probably single. Functionally?.....it can be used multiple times on multiple machines....don't ask how I know...:grin:
 
Wow, that sucks. I think RM is proabably trying to discourage the upgrade in the hopes you'll purchase a more current unit...

The only time I've ever heard of them charging for firmware upgrades is on the older units where you had to physically send it to them for the upgrade.

All of the C and E series updates over the years have been downloadable from their website. No reason they couldn't make yours available online as well.
 
Legally?....probably single. Functionally?.....it can be used multiple times on multiple machines....don't ask how I know...:grin:

Gosh, golly...don't suppose you would know where an example of such an animal might be? Only for research purposes.
 
sorry to hijack your thread a little but does anyone know if this unit can be upgraded to include a fishfinder?

I can tell you more about it than you want to know...however, I am an amateur, professionals trump my answers...here goes...

1. yes, if its a C+ unit. The regular C unit does't multitask or have an HSB something or other...if it doesn't say "Plus" it doesn't work with

2. the former DSM250 now the DSM300 which is the preferred fish finder options however, when you start to do this you find that your transducer

3. doesn't friggin' work and you have to get a new one. However, the B744(?) is a nice option, but be careful, because if you try to buy one off eBay you will find that there were at least a couple of DIFFERENT FRIGGIN' B744 units.

When, and if, I ever do successfully catch a fish...any delight I experience will be tempered by the fact that I would have been able to bring over a French chef (including the pipe hat) and have him cook the most exotic fish on the planet for the next five years for what I paid for the experience of locating and catching it.
 
Jed, I can't answer your question for sure. But having had problems when I updated my Smartcraft SC5000 and our RL 70 display, I would recommend you check with Mercruiser if you have a NMEA 0183 interface to the Smartcraft SystemView, RM and SC don't play nice with each other.

Henry

Thanks Henry, I will check. I like my Smartcraft and haven't messed with it yet. I will tread carefully.
 
A number of years ago I purchased the firmware upgrade and used it on two CR80CRCs and two 631 Chartplotters. I could not tell the difference between the units before and after the upgrade, but Raymarine lists what is in each upgrade.

I have two helm stations, an upper and lower, therefore I have four Raymarine units.

I don't believe that either unit in this series has a fishfinder. The depth shows in a data box and comes over from the Tri Data via Sea Talk.
 
If you want the upgrade chip, I have it. I have The RL80CRC and a DSM300 tied into the HSB2 network. Works great. Even used my old tridata transducer. I'll be back in Florida over the weekend, and look for the upgrade chip. PM me your address
4.11 helped with resolution when using tracks I believe, among other stuff.
 
The RL Series software update is suppose to be a 'one time' use only unless you know how to fool the unit or units and are done with CMap cartridges. The software updates for the C & E Series units are for 'multiple' uses and are done with Flash cards - like in a camera. Be careful with software issues. If you screw it up you have to send the units in and pay the flat rate repair!! It can be expensive!! Contact me if you have questions.
 
I have been a general fan of Raymarine over the years and I as a capitalist, I guess I can't complain about being charged $75 for a firmware upgrade from V2.09 to V4.11 (although I thought updates to firmware have historically not been this expensive). I am hacked that I was charged an additional $12.50 "shipping and handling" to send the firmware update on basically an SD card.

I'm curious...does anyone know if these things are single use or not?

How well did the update run, notice any issues while doing it? Would you say you noticed any differences? I have advised, "supposedly from a Raymarine Tech, to the Marine Electronics place I was using" That if all is currently working okay, to just ignore the upgrade. :huh:
 
If you want the upgrade chip, I have it. I have The RL80CRC and a DSM300 tied into the HSB2 network. Works great. Even used my old tridata transducer. I'll be back in Florida over the weekend, and look for the upgrade chip. PM me your address
4.11 helped with resolution when using tracks I believe, among other stuff.

I was just Spring cleaning and found 370Dancers' RL80C/RL80CRC/RC631 update chip to 4.11. A previous post said that it probably wouldn't work...and I am not challenging that assertion, just saying it worked for 370Dancer, and worked for me. It didn't suddenly turn the system to 3D or anything supercool, but it seems to hang less and do a better job of overlays (purely anectdotal...no scientific testing involved). Anyone who wants it...I'm paying forward (saves you about $100 from Raymarine). PM me...no cost, just an obligation to pay it forward to the next guy that asks.
 
I was just Spring cleaning and found 370Dancers' RL80C/RL80CRC/RC631 update chip to 4.11. A previous post said that it probably wouldn't work...and I am not challenging that assertion, just saying it worked for 370Dancer, and worked for me. It didn't suddenly turn the system to 3D or anything supercool, but it seems to hang less and do a better job of overlays (purely anectdotal...no scientific testing involved). Anyone who wants it...I'm paying forward (saves you about $100 from Raymarine). PM me...no cost, just an obligation to pay it forward to the next guy that asks.

Sent you a PM.

Gene
 
If you want the upgrade chip, I have it. I have The RL80CRC and a DSM300 tied into the HSB2 network. Works great. Even used my old tridata transducer. I'll be back in Florida over the weekend, and look for the upgrade chip. PM me your address
4.11 helped with resolution when using tracks I believe, among other stuff.
 
Hello All! I tried to PM 370 Dancer but I’m not sure if it went through...figured I’d post here as well if anyone can still help it would be greatly appreciated!! Thanks and right lines!

hello! How are you? I’m joe and I have been scouring the internet attempting to find the software upgrade for an RL80. I’m looking to upgrade to v4.11 Bc I can’t xfer waypoints to a card using v4.07. I’m getting antsy that I’ll loose years and years of data points, especially as my machines are the age they are. I found your post and was wondering if you still happen to have the upgrade chip. Any help would be greatly appreciated. I’ve exhausted all options as Raymarine won’t help anymore.

Thanks!
Joe
Rivetsbuy@gmail.com Or try me on here.
 
Hello All! I tried to PM 370 Dancer but I’m not sure if it went through...figured I’d post here as well if anyone can still help it would be greatly appreciated!! Thanks and right lines!

hello! How are you? I’m joe and I have been scouring the internet attempting to find the software upgrade for an RL80. I’m looking to upgrade to v4.11 Bc I can’t xfer waypoints to a card using v4.07. I’m getting antsy that I’ll loose years and years of data points, especially as my machines are the age they are. I found your post and was wondering if you still happen to have the upgrade chip. Any help would be greatly appreciated. I’ve exhausted all options as Raymarine won’t help anymore.

Thanks!
Joe
Rivetsbuy@gmail.com Or try me on here.
Hi, Did you ever get the update? I have one here that I used to update the RL 80 C plus Pathfinder display on my old boat. I am sure it can be used multiple times. I will sell it for $35 If your interested let me know.
 
Hi Matt, Thank you very much. If you could please confirm the chip is for version 4.11 that would be great. $35 is fair, would be happy to paypal you the money. If it is indeed v4.11 just send me your email address associated with your paypal and ill send the money over. my address will be right in there and all my info. Thanks! If you are uncomfortable posting your email on here, feel free to email me. rivetsbuy@gmail.com. or IM me.
 
Hi Matt, Thank you very much. If you could please confirm the chip is for version 4.11 that would be great. $35 is fair, would be happy to paypal you the money. If it is indeed v4.11 just send me your email address associated with your paypal and ill send the money over. my address will be right in there and all my info. Thanks! If you are uncomfortable posting your email on here, feel free to email me. rivetsbuy@gmail.com. or IM me.
 

Forum statistics

Threads
112,950
Messages
1,422,862
Members
60,932
Latest member
juliediane
Back
Top