Help With 1992 Sundancer Cabin Window Part

Folks,

I would like to see if someone in the group could point me to what part / parts this is.

We have a 1992 290 Sundancer, and I was at the boat yard yesterday cleaning and waxing away on the hull.

After about 8 hours with the buffer I had enough. While packing up, I noticed some small square cutouts alone the frame of the cabin windows.

I did not bring a ladder as I was only planning on doing hull work, but noticed that there is some type of cover over these cutouts, and the covers appear to be broken, again, I just noticed this as I was leaving.

When I get back to the boat later in the week, I will get a much better look - just figured I could start looking around and find out what I need to do to replace these.

I attached a picture of the area in question - anyone in the group know what these are, and if I can get replacements.



Again, Thank You to all in the group - the help here is priceless!!!

All the best,

Pat and Carol

http://www.searay.com/boat_graphics/electronic_brochure/Company1729/1C1_24_74DEIPNW03D.pdf

Here's your parts list.

I bet the cut outs are for water to escape when pooling in the window track.

Little Ducky,

Thank you so much for the manual. I did some digging yesterday and found out that Taylor manufactured these covers.

They are called - SEA RAY BOAT SIDE WINDOW WEEP DRAIN VENT COVER GREY 8-1/2" LONG.

Found them in a few places and from what I have read - they are not really UV proof, and that what caused all of mine to disintegrate into pieces.

A few places sell these - going to see how many I need, then give them a coat of UV paint, hopefully they will last longer.

Thank you for the info and manual!!!

All the best,

Pat and Carol