Anyone have a Seadek swim platform pad for their 1998-2002 310 Da. and use there pattern.They sent me a quote using their pattern was wondering if their pattern is a good fit.
Seadek swim pad
- Thread starter dvx216
- Start date
Little Ducky
Well-Known Member
- Jun 5, 2017
- 2,654
- Boat Info
- 1998 290 Sundancer
- Engines
- Twin EFI 5.0L w/Alphas
Kohler 4kW
I believe they will send you the pattern they have so you can confirm and/or modify for your application.
Riptide III
3D
- Dec 8, 2007
- 1,139
- Boat Info
- 1997 Sea Ray 400DA
Cat 3116 TA
1994 Sea Ray Laguna CC 250 Tohatsu
- Engines
- :
They will send it to you for a small fee. It is refundable upon purchase. If you don't like the fit you can modify the pattern they send you or do a new one.
ALWAYS get the pattern from SeaDek to double check. And don't be surprised if it's wrong - then, as mentioned, just make the changes directly on their pattern and send it back. The patterns that Seadek has on file are from customers. Meaning, if you buy without checking you are counting on some Joe Schmoe before you to have measured correctly. I've done enough of these to say that the patterns are wrong enough of the time to not blindly trust them. Their fee for sending you their pattern is very minimal.
bracketracer
Active Member
- Aug 23, 2016
- 560
- Boat Info
- 2001 380DA
Fully updated Raymarine MFDs, Quantum radar, full LED lighting conversion, and lots more.
- Engines
- Twin 454 Horizons
Yep, mine was not quite right also.
Bridog
Well-Known Member
Like the others here mentioned. Get the pattern first. Some on mine were perfect, others were way off. Make adjustments and send back. Even then, check again! Mine came back wrong after making the adjustments and sending it back.