Tigger
Active Member
I was just starting to Google where the senders would be accessed... thanks!
40 sedan bridge forum
- Thread starter Caseclosed
- Start date
Juergen
Member
Steve S
Well-Known Member
- Jun 5, 2007
- 3,123
- Boat Info
- 2000 400 Sedan Bridge with twin CAT 3116's
2000 340 Sundancer - SOLD!
210 Monaco 1987 - SOLD!
- Engines
- Twin Caterpillar 3116's 350 HP straight drives
Have you looked at Flounder Pounder? AKA fpmarine.com
Juergen
Member
I did but I can't find it...
ZZ13
Well-Known Member
No one has it. I looked everywhere. I can't even figure out how to remove it so I can smooth it down and paint it coat it.
bbwhitejr
Well-Known Member
ZZ13
Well-Known Member
Steve S
Well-Known Member
- Jun 5, 2007
- 3,123
- Boat Info
- 2000 400 Sedan Bridge with twin CAT 3116's
2000 340 Sundancer - SOLD!
210 Monaco 1987 - SOLD!
- Engines
- Twin Caterpillar 3116's 350 HP straight drives
Juergen
Member
crap... I found in a Sea Ray parts list the part # for the pull handle 828988 and part # for the cover plate 1372838 but can't find it online.... Any idea how to go ahead from here?
Juergen
Member
this looks promising, I think the one below looks more like it. I'll check. Thanks Steve.
Attachments
ZZ13
Well-Known Member
Flounder Pounder has the exact ones installed on your boat in gold.
http://www.searay-parts.com/Vimar-Rondo-Cover-Plate-3-Module-Round-Corners-p/vimar3moduleround.htm
potis
Active Member
Wow, beautiful job!!FINALLY, after about 80 hours in about a 2 month period on my knees and a million times getting up and down and back and forwards I'm done!!!! Ready for a big cold beverage now, cheers
Cocktail Time
Well-Known Member
- Jul 9, 2007
- 1,208
- Boat Info
- 1998 400 Sundancer, Garmin 840xs GPS, Furuno Radar, B&G GPS pilot etc.
- Engines
- Cat 3116's, Westerbeke 7.6 BTD
Juergen, if you are going to change the outlet frames to a color other than gold, (Flounder Pounder has chrome and nickel too, I need a couple gold ones to replace some that are nicked. Let me know if you want to sell your old ones.
cwiert
Active Member
Has anyone replaced the curtain in the salon that covers the slider? Mine is original and looking that way. I'm looking for a more modern upgrade. What do new boats use? If you've replaced that curtain with something else, can you please post pics and give me some ideas? Thanks.
Drafter
Active Member
- Oct 5, 2017
- 249
- Boat Info
- 1998 400 Sedan Bridge
1969 Boston Whaler 13
- Engines
- Horizon 454 380's
This is on our list as well, and I look forward to see what you come up with. Ours are in good shape, just filthy. They're probably going to come down this weekend and make a trip to the dry cleaners. I've only looked briefly. Looks like the sliding hooks in the track have to slide out of the end with the track removed?? We're in the process of an interior upgrade as well. Furniture has all been recovered from a 90's green. Still waiting on the starboard side couch.. I recovered the vberth stateroom bolsters myself Tuesday night in my garage after work to reinstall this weekend.
Attachments
cwiert
Active Member
Anyone know how big the slider on our boat is? Can a standard one from HD fit in there? For about a boat buck, there are the sliders with the blinds incorporated into them.
https://www.homedepot.com/p/JELD-WE...t-Sand-Interior-Blinds-JW1815-00196/206147994
https://www.homedepot.com/p/JELD-WE...t-Sand-Interior-Blinds-JW1815-00196/206147994
Drafter
Active Member
- Oct 5, 2017
- 249
- Boat Info
- 1998 400 Sedan Bridge
1969 Boston Whaler 13
- Engines
- Horizon 454 380's
Speaking of our losing the green makeover.. I sourced the fabric for our original bimini top to be rebuilt in Navy blue. Parts are all ordered to be in hopefully tomorrow and then dropped off with a local fabricator. My original factory version is in great shape. It's 20 years old, but has always been under a dock. We just hate the color.. Assuming that our fabricator does not take it completely apart to use the components as templates, does anybody want it? The original has eisenglass zippers. From Searay these are close to $3K. I'm about $450 into fabric, binding, zippers and even thread.
I hope to be $300-$400 for labor and hopefully of the same quality.
I hope to be $300-$400 for labor and hopefully of the same quality.
Attachments
cwiert
Active Member
PM sent.
Pierpressure1
Active Member
My wife is in the process of doing this with the help of a friend that is good with the sewing machine. I think she purchased pre made panels and sewed them together and moved the tabs over from the old curtain. Once she is done I will post the results.
mmills023
Member
Happy Friday! As I get ready to close (fingers crossed) on a new to me 2002 400DB, I have been looking at all the "projects"....erm..."upgrades" available. I came across this 400 in my search and wondered if anyone here has heard of anyone fashioning a hard top for their 400? The pictures available were not great or detailed, but you get the idea. Here is the link (it looks like it was a very old listing) https://www.hmy.com/used-yachts-for-sale/SEA-RAY/2001-40-400-Sedan-Bridge-FRESH-WATER/106431
Found another one - https://www.hmy.com/used-yachts-for-sale/SEA-RAY/2000-40-400-Sedan-Bridge/241789
Found another one - https://www.hmy.com/used-yachts-for-sale/SEA-RAY/2000-40-400-Sedan-Bridge/241789
Last edited:
