480 DB Owners Club

Thanks, so much. Appreciate you taking time to find. Will order today. Thanks. Dave
 
Quality Time- do you know if it was a 75 or 150 PSI? Still couldn't tell from that part.
 
Since everyone has been so helpful... trying to locate replacement "screw plug/caps" that hold the shower plexiglass panels in the heads. All of them are crumbling and missing the top cap that hides the screw. Port shower has 12 that hold the plexi panel and the master has 7. Any idea where to find these? No luck at any hardware store. Thanks.
Shower Screw Plugs.JPG
 
When you find them, let me know! This has been at the bottom of my list for some time because I can't find them either. They are more than just a screw cap, kind of like a grommet since the smaller diameter fits into the plexi. No luck googling images of grommets or bushings...
 
I had the 3's and they were amazing. The X's are supposed to be a more diffused and brighter vs. the 3's. From a price and performance standpoint, they are hard to beat. You will be impressed.
 
Since everyone has been so helpful... trying to locate replacement "screw plug/caps" that hold the shower plexiglass panels in the heads. All of them are crumbling and missing the top cap that hides the screw. Port shower has 12 that hold the plexi panel and the master has 7. Any idea where to find these? No luck at any hardware store. Thanks. View attachment 53915

I had found a suitable replacement for them at home depot in the hardware section by accident. They are white with a snapover cap.. think they were about $0.20 per item.
 
Thanks, Quality Time. Would like to know for sure exactly what I should replace with. Let me know when you have a chance. Don't know if you will be able to see manufacturer and part number. Thank you. Dave
Mine was a 75psi, had to put a 150psi in it briefly to get home, got the 75psi off of Amazon
 
Where exactly is the Air intake manifold pressure sensor (aka Boost sensor) On a 2004 480DB QSM11? Thanks
 
Last edited:
I've seen pics of 480DBs with "wood" floors in the Salon, Has anyone done this that would share some photos and answer a few questions? First, what did you do about the engine access panels? Does your floor come back up w/out destroying it? What material/flooring did you use? If you left a cut-out around the engine access what did you use on the edge? Sorry for all the questions but I'm about to do this and need all the input I can get. Thanks!
 
Last edited:
I've seen pics of 480DBs with "wood" floors in the Salon, Has anyone done this that would share some photos and answer a few questions? First, what did you do about the engine access panels? Does you floor come back up w/out destroying it? What material/flooring did you use? If you left a cut-out around the engine access what did you use on the edge? Sorry for all the questions but I'm about to do this and need all the input I can get. Thanks!
Mine were done prior to my ownership - sorry
 
Does anyone know how the fuel cross over works with the generator supply? If you switch the motor feed does it affect the gen or does the gen just always feed off the one tank?
 
I've switched which tank my mains pull from before but don't believe the gen has that capability. Just on and off if I remember correctly.
 

Forum statistics

Threads
112,946
Messages
1,422,778
Members
60,929
Latest member
Henchman
Back
Top