460 DA Owners Thread

Yes, they still have my templates. I’m sure they will fit perfectly for you as well. The head shower molds are all the same so I’m guessing my templates will match your floors.
 
Could you send me the 2 pictures of the head, then I could send them to Corithian so they get it right. Thanks Bob
 
Wolf


That turned out great! The head's look nice as well, I hadn't thought of that at all and am considering having teak shower mats made but I may just do mine like yours! What backing did you end up going with?

Josh
 
Wolf


That turned out great! The head's look nice as well, I hadn't thought of that at all and am considering having teak shower mats made but I may just do mine like yours! What backing did you end up going with?

Josh
Hi Josh,
I went with the AquaLoc backing. When we laid out all the pieces and started "nesting" them together we knew there would be too much waste so started looking for other areas to fit it in. :) We even did the little compartment where the main DC panel is with battery switches. If you speak to Jennifer or Debra at Corinthian, they have the templates and they were labeled as pieces #7 & 8. Piece #9 was for the small compartment...photos below.
IMG_1199.JPG
IMG_1200.JPG
IMG_1201.JPG


PS: Yes, I know that outlet does not have the correct cover on it...LOL (just haven't gotten around to it. The PO left it like that.
 
Could you send me the 2 pictures of the head, then I could send them to Corithian so they get it right. Thanks Bob
Yes sir...check your inbox.
 
Make your own templates.
It’s a great product. We love it. But they originally made mine up from another template and there was a fitment problem with the base for the cockpit table bracket.
They were great about it and made me a new piece after I sent them a template.
 
ACR spotlight not working. I've got power leaving the helm panel switch but no power to the controller. Does anyone know where to look for an in line fuse or is there something else I should be looking for?
 
ACR spotlight not working. I've got power leaving the helm panel switch but no power to the controller. Does anyone know where to look for an in line fuse or is there something else I should be looking for?
Not 100% certain on this, but check the cable connector. It looks like a standard coaxial cable hook up. I almost made the mistake of cutting it off under the helm while cleaning up a bunch of non-use wires...then I saw that it actually went to the anchor locker and controlled the spot light.
 
Just goofing around before the game today and decided to add a little indirect lighting to the storage shelf port side. :)
IMG_1236.JPG
IMG_1234.JPG
 
That looks really classy! What I want are the details on the liquor dispenser... :)
 
That looks really classy! What I want are the details on the liquor dispenser... :)
That was a GREAT addition last season...I will send details via message. I purchased it from Sidebar Beverage Systems in AZ. http://www.sidebarbeverage.com/
Let me tell you...we were the "hit" on the deck at happy hour...which is good and bad all at the same time..LOL
 
Thanks for the message! What an awesome system, I’m going to put that on my fall list. I’m almost ready for summer at this point and don’t want to start any additional projects. Haul out scheduled in 2 weeks and final prep for a summer of fun !!!
 
Thanks for the message! What an awesome system, I’m going to put that on my fall list. I’m almost ready for summer at this point and don’t want to start any additional projects. Haul out scheduled in 2 weeks and final prep for a summer of fun !!!

You REALLY need that Josh
 
WolfTC: Very cool lights, but the sidebar is awesome! I'm going to copy you on both. Thanks for posting the great pics.
 
WolfTC: Thanks again for the additional pictures. One question, with the longer run, does it waste more booze when you switch from one type to another (i.e. from Captain to Gin on the same line)? Also, any problems with keeping it primed?
 
WolfTC: Thanks again for the additional pictures. One question, with the longer run, does it waste more booze when you switch from one type to another (i.e. from Captain to Gin on the same line)? Also, any problems with keeping it primed?

No waste at all....there are 5 lines, 1 for each liquor! They do not recommend sodas or "cream" liqueurs.
No problem with priming all summer...except for once when I ran out of Vodka. :) Then just had to re-prime and it only takes a minute. Just use the hand pump included and push the liquor back through the system to the outlet.

Now, if your question is..switching a bottle of Gin to Captain on the same line lets say 5, then yes, you will have to run the Captain out of the line before the gin arrives. Depending on how long the run is, in my case about 12', there is that much liquor always in the line...its a small line so it isn't much.
Hopefully that answers the question.
PS: I do not condone drinking and captaining a vessel while underway! (I think I need to add a disclaimer...:) )
 

Forum statistics

Threads
112,945
Messages
1,422,746
Members
60,928
Latest member
rkaleda
Back
Top