Has anyone had to replace the top sliding cabin door hardware on a EC400,1995. Mine has jumped track and needs new hardware, also need help to find parts. Sea Ray say you have to replace all track, slides etc., expensive.
Sliding Door for cabin
- Thread starter CRoss
- Start date
Gofirstclass
Well-Known Member
I had to replace the lower track on my sliding door. To do it I called a local glass shop. It took them about 2 hours to take it all apart, replace the track and get it back together. I think the cost was somewhere around $150 IIRC.
Tonka Boater
Well-Known Member
The tracks have various nuances over the model years so there's not a single answer. Suffice it to say, some doors are pretty easy and some are a royal PIA. I had to replace the trucks (wheels) on the door on my 2008 280DA and it wasn't easy but it wasn't horrible. If you do a search, you will find some situations where the entire helm needs to be removed to fix the track and trucks.
aquaholic
Member
- Jul 7, 2009
- 96
- Boat Info
- 37 express cruz, 3126 cats, all new garmin electronics,
- Engines
- 3126 cats
flounder pounder .com will most likly have what you need
Air O'Nautical
Well-Known Member
- Feb 5, 2008
- 2,316
- Boat Info
- 1995 400EC. Raymarine E80, Tridata, 4kw dome, Garmin 943
- Engines
- 2013 7.4L Mercruiser Blue water.
Hurth straight shaft 630's,
Westerbeke 7.0 BCG
I have a 1995 400EC and went through this (mention in the “Official 400EC” thread).
The trucks and track available from several sources are a different size than you need..
The trucks you need is no longer made and are smaller than the newer ones available. The tracks should be OK.
Idea!
Find someone with a Digital printer that can make you the parts you need.
The trucks and track available from several sources are a different size than you need..
The trucks you need is no longer made and are smaller than the newer ones available. The tracks should be OK.
Idea!
Find someone with a Digital printer that can make you the parts you need.