Official 350 Thread

Thx Ed, were your windows leaking?
 
Soon to be owner of a 1991 Sea Ray 350...looking forward to the forum.
 
  • Like
Reactions: QT1
I have a 2017 350DA with an Axius joystick. I’ve heard the Axius system is very voltage sensitive. Does anyone know which batteries the system draws from? I still have all four original batteries and have had no issues so far, but I would like to avoid a problem when the system decides to crap out unexpectedly.
 
Time to get this thread active again! I just bought my 1991 350 Sundancer and I will need help from all of you and also will need help getting through this winter while thinking of all the boat projects ahead. I need the door tracks mentioned previously. Not available, except in white. Anyone know of another source. I tried FP but no luck. I'd really like them in black so I dont need to paint. Also, need a source for the oval front accent windows as mine are cracked. Not leaking, but I'd like to fix. Also I need to talk cleaning. What can you do with the wall cloth that wont make it come off or deteriorate. Thanks!
 
1991 350 Sundancer and its got those deteriorating black foam style shifter knobs. Does anyone have a replacement idea. Arms only or entier assembly? Thanks!
 
Jacks-N-Rays said:
Time to get this thread active again! I just bought my 1991 350 Sundancer and I will need help from all of you and also will need help getting through this winter while thinking of all the boat projects ahead. I need the door tracks mentioned previously. Not available, except in white. Anyone know of another source. I tried FP but no luck. I'd really like them in black so I dont need to paint. Also, need a source for the oval front accent windows as mine are cracked. Not leaking, but I'd like to fix. Also I need to talk cleaning. What can you do with the wall cloth that wont make it come off or deteriorate. Thanks!
Click to expand...
Searayman on ebay has the oval windows.

Someone earlier in this thread used aluminum L stock to replace the broken black plastic U channel for the door. If you go that route and want to paint it black, use self etching primer so it adheres to the aluminum well.

I bought my 1991 350 last summer. It's in freakishly good condition for its age. I'm trying to decide if I want to update everything or just preserve the time capsule.
 
Thanks 270win! I'll look into it. Let us know how your projects go too! Can't wait until April!
 
Anodes! I have anodes on the trim tabs, the transom and a large rectangle on the starboard hull near the prop. There are none on the shafts. Does this rectangle cover both shafts or do I need to add them for the shafts? Thanks!
 
Jacks-N-Rays said:
Anodes! I have anodes on the trim tabs, the transom and a large rectangle on the starboard hull near the prop. There are none on the shafts. Does this rectangle cover both shafts or do I need to add them for the shafts? Thanks!
Click to expand...
X-5M (Magnesium) 1-1/4" shaft anodes available from Boatzincs.com
 
Ok, anyone able to share a photo of where their AC water pump, strainer, and thruhull is mounted in the bilge of their early 90s 350 Sundancer? Mine is not mounted and just resting in the port side stringer bilge area on top of other hoses, needs mounted.
 
Ok, the 350 is really coming along. Great bones, most things fixed, just smaller projects left as always will be. Does anyone have a pic of the center couchs insert cushion thats a half moon? I dont think I have it. Any best ideas for TVs and mounting?
 
As far as TV mounting, chucked the v-berth TV and put a 22-23 inch flat screen on the original turntable mount. A DVD player sits right behind that which is powered by USB cable to the TV. Working on my 32 inch Flat screen to be mounted at the bulkhead to the Aft berth.
 

Attachments

  • IMG_2627.JPG
    IMG_2627.JPG
    121.7 KB · Views: 50
  • IMG_2626.JPG
    IMG_2626.JPG
    121.1 KB · Views: 52
I like the tv mount you did and I think that's what I'm going to do. I have twin 496 v-drive inboards. The water pumps are on the stern and bottom of the boat. I cannot seem to get to them. Anyone done impellers on this setup?
 
Well its spring and about time to get the projects started. First bottom paint, put up canvas, finish new MFD install, install TV, outlet, and mount. Chase down engine gremlins and then run alot of gas through her! What about you?
 
Jacks-N-Rays said:
Well its spring and about time to get the projects started. First bottom paint, put up canvas, finish new MFD install, install TV, outlet, and mount. Chase down engine gremlins and then run alot of gas through her! What about you?
Click to expand...
Today is April 6th 2024. My 90 350 is on stands at the house. Projects include, Under water lights, fix of 40 or so blisters, bottom paint, install Air mar B619 transducer for the new Garmin, UHD 93SV, New deck upolstry, New black canvas. wiring clean up with side panels off. Rudder angle indicator, New FP Marine panel, New complete faria engine gauges, New el panels that light up my new FP marine panels. Installed a 2 bank 15 amp X2 house and start battery charger. Wash down pump connected to what was once the waste discharge now an inlet source. Fixing exhaust area gel-coat cracks. Removed holding tank, cleaned, replaced hoses and getting floats working again.
Much more just drawing a blank. Oh, New tides marine new style dripless. Replaced both cutlass bearings, Hopeful splash in 3 or so weeks.
 
  • Like
Reactions: QT1
Wow Beech2000, that is an ambishious list! Best of luck!
 
Jacks-N-Rays said:
Wow Beech2000, that is an ambitious list! Best of luck!
Click to expand...
Thanks,
So many pictures. Would love to share to group. Do you know image size limitations?
 

Attachments

  • IMG_1940[1].JPG
    IMG_1940[1].JPG
    2.8 MB · Views: 11
  • IMG_1945[1].JPG
    IMG_1945[1].JPG
    3.1 MB · Views: 12
QT1 said:
As far as TV mounting, chucked the v-berth TV and put a 22-23 inch flat screen on the original turntable mount. A DVD player sits right behind that which is powered by USB cable to the TV. Working on my 32 inch Flat screen to be mounted at the bulkhead to the Aft berth.
Click to expand...
What flooring did you use. We still have carpet and would love a better look such as yours
 
You must log in or register to reply here.

Forum statistics

Threads
113,122
Messages
1,426,619
Members
61,037
Latest member
wojozobl
Back
Top