Bob St John
New Member
- Nov 30, 2022
- 29
- Boat Info
- 1993 27' Sea Ray Weekender (7.4L with Bravo 3)
- Engines
- 7.4L with Bravo 3
Folks,
GLBT has provided the necessary information for me to adjust the non-OEM stainless steel framework on my boat:
On my non-OEM framework, the width measurements (68" and 77") are accurate, so I only need to shorten the leg length to 22 3/4 inches, and that should be relatively easy to do (remove end pieces, shorten legs, and reinstall end pieces.)
Thanks,
Bob St John
GLBT has provided the necessary information for me to adjust the non-OEM stainless steel framework on my boat:
The rear supports are measured at 21 1/4 inch in shortest position since they are adjustable.
Our main bow cut length before the ends are put on are 10ft 5in and the 2nd bow is 8ft 5in cut lengths and then they are bent and ends added.
Our main bow cut length before the ends are put on are 10ft 5in and the 2nd bow is 8ft 5in cut lengths and then they are bent and ends added.
Thanks,
Bob St John