I just ordered a Bed Scrunchie

Sam Worsham

Sam Worsham

Member
Nov 22, 2019
53
Lake Lanier, GA.
Boat Info
2006 38 DA
2008 250 SLX (Sold)
87' Donzi 21 Z (Sold)
Engines
Mercury 8.1S horizons inboards
With hopes of keeping the mattress topper in place and the sheets on an irregularly shaped mattress, I have ordered the Bed Scrunchie. I'm hoping that making the bed will not look like a balancing act and simultaneous tug-of-war with a fitted sheet.

Will report back once it arrives.
 
Sam Worsham said:
With hopes of keeping the mattress topper in place and the sheets on an irregularly shaped mattress, I have ordered the Bed Scrunchie. I'm hoping that making the bed will not look like a balancing act and simultaneous tug-of-war with a fitted sheet.

Will report back once it arrives.
Click to expand...
Interesting. I have used some old suspenders I had from back when they were popular.
 
Steve S said:
Interesting. I have used some old suspenders I had from back when they were popular.
Click to expand...
I used the suspenders, too. This adds another bungee in the center that cinches all of them to the middle. I'm hoping that it will draw the sheet under the mattress and give a snug fit.
 
Not sure what’s going on in bed with you guys…. We ditched the mattress and bought 4” foam and a 2” memory foam topper and spray glued the topper to the foam. Then a fitted mattress cover, then a fitted sheet. Nothing moves and the most comfortable bed ever

633B23B3-94F6-4431-BEA9-AA4D1D364C3F.jpeg
 
Blueone said:
Not sure what’s going on in bed with you guys…. We ditched the mattress and bought 4” foam and a 2” memory foam topper and spray glued the topper to the foam. Then a fitted mattress cover, then a fitted sheet. Nothing moves and the most comfortable bed ever

View attachment 136963
Click to expand...
Where did you get the fitted sheets and comforter?
 
jmauld said:
Where did you get the fitted sheets and comforter?
Click to expand...
The fitted sheets are just standard king or queen…. What Ever you need to cover the width…. The excess just goes underneath…. I assume the foam holds it in place. The comforter was made from the original used as a pattern. It was some friend of my wife’s mom who does this kind of thing in her basement for extra money
 
Blueone said:
The fitted sheets are just standard king or queen…. What Ever you need to cover the width…. The excess just goes underneath…. I assume the foam holds it in place. The comforter was made from the original used as a pattern. It was some friend of my wife’s mom who does this kind of thing in her basement for extra money
Click to expand...
How much does she want to make one for me?
 
jmauld said:
How much does she want to make one for me?
Click to expand...
I’ll ask…. It was a few years ago we did it. The lady is in Canada and only works from an existing bed spread. You buy material piping etc…. Ship it there
 
Custom Comfort Mattresses and Marine Bedding 954-496-8400

They have the template for the 460. I purchased a set that included a fitted sheet, flat sheet and two pillow cases. I added two more pillow cases. The sheets are 400 thread count and super comfortable. I ordered a second set this year and I added a fitted mattress pad. $195 for the mattress pad. $295 for the sheet set.

They also make custom mattress toppers and full mattresses.
 
It works great, but it is a bitch to get it on. If someone has a trick to getting it on, I would be grateful to learn it.
 
Getting the mattress topper and sheets on the bed in the aft berth on my 330 is HORRIBLE. I need to spend some time to take the berth cushions fully out and apart to see if there is any better way.
 
Blueone said:
Not sure what’s going on in bed with you guys….
Click to expand...
Shhhhhh;);););):D

We've been using one of these for a couple years now. Once you get it on it works great, but it's a workout getting it on. I'm talking about the Scrunchie Blue...:D:D:D:D
 
You must log in or register to reply here.

Forum statistics

Threads
113,117
Messages
1,426,454
Members
61,032
Latest member
Brock340
Back
Top