Sea Ray fiberglass colored gelcoat repair

Does Sea Ray offers a gelcoat touch up kits pre-mixed to the Sea Ray color you need?

I have two spots that need to be touched up. One is white and one would need to be the tan color of the dash.

Does anyone know if these kits exist and where you can get them?

Try this site - they sell a repair kit. I have used it with great success for a little ding. They give you instructions as well and it is pretty easy and inexpensive. They color for my boat was arctic white.
http://www.spectrumcolor.com/catalog.htm

Doug, lots of posts about using the stuff from Spectrum.

I think TurtleTone found that calling Sea Ray with the hull ID first would be the first step, the local dealer might even stock it. If not, then give Spectrum a call.

Thank you. Green "I approve" for you!

Doug,

Test a small amount of the Spectrum paste on something with a neutral color that you can hold up to the boat or panel. The guys around here that have tried it have had good success with the mechanical repairs but not with the color match.

The tan is the issue here since you can probably wet sand and blend the white sell enough to make the repair work.

if you get a batch that doesn't match well enough to suit you, it is far easier to handle it before it gets on the boat than after you have to grind it out, make the spot 2X as big, and then handle the bad color with Spectrum anyway.

Just a thought...........

Hey Frank,

Thank you. PS, I bumped you up to a 6th Green dot.