There is a breaker switch in the 12vdc panel. Check to see if it has tripped off.
Just finished mine well worth the effort!
In had two hours in mine after removing all the snaps, I used a heat gun on a few spots and it came right out in one big piece. Had to sand some glue and uneven places here and there but it was quicker than I was expecting!
Looks great!!
Do you have a sort of close up of how you framed out the floor hatches?
I used Tile edging from Home Depot and cut on miter box used some JB weld on bottom side to hold a solid joint seem to turn out well. next time I'm at the boat I'll take some better close ups.
That looks AWESOME! As the resident new 370 owner, what "size" lettering did you go with? My boats around 45 minutes away and I failed to measure the current lettering for reference.
I will look it up, can’t remember exactly…
Ugh. I don’t see the sizing in the order.
Sir, are you looking merely for dimensions or is there something in particular you are looking to obtain? Wondering if I have any of something you need in my small cache of documents.
I would assume it’s in the same location as the 98, under the settee next to the central vac.
