2006 40 sundancer salon fridge not working

I know, old thread. But my RSD115 fridge just packed it in. Curious if anyone ever found a comparable replacement?
Thanks
 
Had the same issue last week with the same refrigerator… ordered a isotherm d130 drawer model. It is due to arrive tomo and will be installing soon there after. Based on my existing cutout measurements it should be an easy install. My biggest challenge is fitting the new/old out the doorway (07 38da).
 
RSD115 is slowly dying too. We have a 2006 380 with small freezer with wood front on top and matching RSD115 wood front on the bottom. I guessing you have Stainless Steel fronts on both units. How do you like the drawer refrigerator set up? It’s really tough to see the usable space in the product brochures.

Thanks for waking up this thread
 
Yes, stainless freezer and fridge. We really like the drawer setup on both, especially the refrig. To get anything out of the old model you used to have to get down on a knee to see anything inside and remove a bunch of items to find what you were looking for... with the drawer model you just open the drawer and look down at your items in 2 or 3 pullout drawers. So far everything is working great...
 

Attachments

  • galley.jpg
    galley.jpg
    109.6 KB · Views: 111
Yes, stainless freezer and fridge. We really like the drawer setup on both, especially the refrig. To get anything out of the old model you used to have to get down on a knee to see anything inside and remove a bunch of items to find what you were looking for... with the drawer model you just open the drawer and look down at your items in 2 or 3 pullout drawers. So far everything is working great...

That looks great! What model freezer and fridge is that? Is it the d130 as you mentioned above? But what about the freezer? This my winter project as my freezer is dying out but really looking to replace both at the same time on my 360DA—setup similar to yours with smaller separate freezer.
 
Yes, stainless freezer and fridge. We really like the drawer setup on both, especially the refrig. To get anything out of the old model you used to have to get down on a knee to see anything inside and remove a bunch of items to find what you were looking for... with the drawer model you just open the drawer and look down at your items in 2 or 3 pullout drawers. So far everything is working great...


Looks great, Also noticed treads on your stairs. Bought this boat in June and several people have slipped down the stairs. Never had that issue on other Sea Ray’s with wood stairs. Did you install the treads?
 
Yes, the wood steps with a little water on them are super slippery. I bought a piece of teak eva foam on ebay and cut a few strips, surprisingly they have held up real well considering the traffic
 
What are thoughts on this: I’m thinking about converting my RSD115 DC only refrigerator to AC/DC for a more stable power supply. I’ll have to pull the unit out to get the compressor model then look for a AC/DC control unit. Replacing both freezer & refrigerator is $3000+ and the ac/dc control units are under $200. I did this on our 330SD drawer refrigerator and it worked great.

The replacements are inevitable but this could buy me some time.

Have a great day!!
 
I’m looking at the domestic CX110. Looks like a direct replacement. Anyone have one installed?
 
Yes, stainless freezer and fridge. We really like the drawer setup on both, especially the refrig. To get anything out of the old model you used to have to get down on a knee to see anything inside and remove a bunch of items to find what you were looking for... with the drawer model you just open the drawer and look down at your items in 2 or 3 pullout drawers. So far everything is working great...
How did you get them through the cabin door?

how has the isotherm held up?
 

Forum statistics

Threads
112,942
Messages
1,422,701
Members
60,927
Latest member
Jaguar65
Back
Top