310 Sundancer Thread (2007 & newer)

wyrman said:

I replaced the cockpit fridge. I don't have the model number right now, but I went ahead and put another Norcold in because it was what fit the best.

Click to expand...

RighteousVectors said:

Thanks for the response, I guess I call NorCold and see what they say

Click to expand...

Three Seasons said:

Welcome...

I recalled this post from the 330/350 SD thread regarding microwave replacements
http://www.clubsearay.com/index.php...8-and-newer-thread.30756/page-36#post-1162798

This is a great thread to follow as the 2007 and newer 330/350 have many similarities to your 310.

All the Best

Click to expand...

Three Seasons said:

Welcome...

I recalled this post from the 330/350 SD thread regarding microwave replacements
http://www.clubsearay.com/index.php...8-and-newer-thread.30756/page-36#post-1162798

This is a great thread to follow as the 2007 and newer 330/350 have many similarities to your 310.

All the Best

Click to expand...

RighteousVectors said:

The LG all in one coffee carafe is missing ...... replace the Norcold cockpit refrigerator?

Unless you were told it was broken, look around for the carafe. I found mine buried in a cubby. The replace fridge is this one - https://www.amazon.com/gp/product/B00AJVLGXA/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Click to expand...

Click to expand...

stephenm27 said:

Next project: has anyone successfully removed their salon (cabin) door on the 310/330 without removing the large port-side shroud that covers it when open? The screws that attach the upper 2 plastic door slides (which ride in the door track) to the door structure have stripped and allow the door to "rock" noticeably fore and aft . This play also causes great difficulty in opening/closing the door (requiring various amounts of undue force). Tracks and slides are clean/clear and have been lubricated.

I can remove the shroud but it appears to be a very involved effort (removal of factory colored caulking, hidden screws, etc) so I was curious if anyone here has tackled this project and has words of wisdom?

(I have searched exhaustively on the forums but most pertain to other/non-similar design doors. If this has already been covered for a current model 310/330, a link to that thread would be appreciated.)

Click to expand...

RighteousVectors said:

Anyone have experience replacing the following items?

The upper damper on the rear rumble seat?
The transom shower head? It’s currently missing.
There is a small domed antenna on the starboard side that is missing it’s cover and electronics are exposed so I need to get another one. It’s small, maybe 4 inches in diameter. Not a radar or tv antenna. Maybe gps? The boat does have Axius.
Has anyone replaced the windlass foot switch covers? Mine are falling apart.

Thanks in advance

Click to expand...

dmorris800 said:

I would try sea ray for part info. As for the dome I believe it is the gps antenna.

Click to expand...

wyrman said:

I replaced the windlass foot switches last spring. Defender was the best price I could find.
If you remove the mirror above the main bed, there's an access to the windlass controls.
https://www.defender.com/product.jsp?id=1564993
Replacementboatparts.com will have the transom shower.

Click to expand...

RighteousVectors said:

The switches work it’s the just covers that look crumby. Can I just replace the covers or I have to replace the whole switch like you did?

Click to expand...

wyrman said:

I think you can replace the cover, but not sure about the rubber over the switch.
I wanted stainless covers so I replaced the whole thing.
Here's a couple of pics from when I did mine.

Click to expand...

wyrman said:

The stainless ones sure look nice.View attachment 105480

Click to expand...

wyrman said:

The stainless ones sure look nice.View attachment 105480

Click to expand...