Peter P
New Member
Hello forum,
We have a 2008 SeaRay 195 4.3L MPI with Alpha One outdrive.
Putting it back in the water after winter storage the engine runs fine but in drive it hesitates and does not come up to speed.
After a while the boat drives fine, driving around 2000 rpm we feel a big clunk, as if we hit a piece of wood..
Boat slows down, impossible to get it back up to speed with engaged drive.
We can luckily limp back to port at very low speed, speedometer stays at 20 MPH even at this speed.
No damage to the propellor.
Does anyone have an idea what could be the cause?
Thanks for your advice,
Peter
We have a 2008 SeaRay 195 4.3L MPI with Alpha One outdrive.
Putting it back in the water after winter storage the engine runs fine but in drive it hesitates and does not come up to speed.
After a while the boat drives fine, driving around 2000 rpm we feel a big clunk, as if we hit a piece of wood..
Boat slows down, impossible to get it back up to speed with engaged drive.
We can luckily limp back to port at very low speed, speedometer stays at 20 MPH even at this speed.
No damage to the propellor.
Does anyone have an idea what could be the cause?
Thanks for your advice,
Peter