Stovetop glass separated...

Little Bit

Member
Nov 22, 2008
83
Lake of the Ozarks
Boat Info
1999 Sea Ray 370 AC
Engines
Horizon 7.4 MPI's
I searched and found nothing... anyone seen this before???

Yesterday as we were cleaning up the galley area the glass top just lifted right off. Only thing keeping it in place was/is the knob posts.
Any ideas?
I'm thinking about sticking it down with black hi-temp silicone at the corners.
Thanks Denny
uaeOXvtcbIqcJ6fB0YXnc65RWEtnzJ4RErLHGlUpvS7c04KSqGoAldttrtwdo1VgjkHCJhl4IocoVmuJfhaWnff74VsZhyedrlgjQGr_1h1MspNGta96HUyrJzIyDrlyW4gioB-RyLoJtXp8NkrOnvkFrv7nAB8zPKuTRXrIKubravFUrA5qFZi_Belzn1YEUDZVVPj6POPtcOIM_-gTdu9r4SrPmtAo6jq5s0hj1gbUZNSYKLG7LfpsJhzXjvlGxrJ_etfdZNgxM9-4soDWo7bOau_ECrR4-SzsKhvZOaXCt_sXqFyFJgS1bo2xc9ogr_NbGkJKFmET01BwQe4UBdw803mo2t8AJqf8UPu-AozlpOwexnnsVniHCp1KtpbA4Cs0ICoA4T5a1rTAWEBhQgIUwB2oNqYXK2qaLIwlx2zoSG2MLRIuE1A5ITGSrVyF3vw8_rzW6skMFghlqUslGnFQFcGhaTY3q4gRCjo88n6wFM4L8tRiSu5cliZgJm5cyZJaG1imbXx39frl3zfRmdEB20NfqgeOJGpeaRJoiCMEdDlM8d036Nd7tGA0RcdaEu5pjBuXxmeFs2EEu5bsOnZvTqxELBZOXKteXBw9KBmBHQ9DOhjsfTE9V6rMoju_Sp6kuNSjgYOceMNwRB74CTO4NZcFEjBjoxbPNHD5s4w3btfOtTmvEMVzTCvzKw=w469-h625-no

AF1QipN-tQaJtQWWSaSwr3BtUkF2-ACfXGnXh1seBdgY
 
Last edited:
C3B49088-512B-4AB9-94F5-014A419D1003_sRGB.JPG

I would call the manufacturer and ask them what to do.
 
Last edited:
I searched and found nothing... anyone seen this before???

https://photos.app.goo.gl/3DSqpwE8ewakhb8Q6

Yesterday as we were cleaning up the galley area the glass top just lifted right off. Only thing keeping it in place was/is the knob posts.
Any ideas?
I'm thinking about sticking it down with black hi-temp silicone at the corners.
Thanks Denny
I agree, high temp automotive silicone should work fine as it is way away from the direct heat areas.
 
I searched and found nothing... anyone seen this before???

https://photos.app.goo.gl/3DSqpwE8ewakhb8Q6

Yesterday as we were cleaning up the galley area the glass top just lifted right off. Only thing keeping it in place was/is the knob posts.
Any ideas?
I'm thinking about sticking it down with black hi-temp silicone at the corners.
Thanks Denny

A hot posting tip...hopefully :)...if you can find the "BBCode" URL for your photos you can imbed them instead of having us go to the link. You can use the button that looks like a photo once you have that URL. For us lazy surfers!
 
C3B49088-512B-4AB9-94F5-014A419D1003_sRGB.JPG
Always good to check in with a primary source expert. Glad you got what you needed.
 

Forum statistics

Threads
113,119
Messages
1,426,565
Members
61,035
Latest member
Lukerney
Back
Top