Haden
Active Member
- May 27, 2020
- 482
- Boat Info
- 2001 Sea Ray 380 Sundancer
- Engines
- Twin 8.1l Mercury w/V Drives
Need help finding a company that will wet load fresh water in Madison, Mississippi. Then wet launch fresh water in Decatur, Alabama.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
OK, I've been around boating for a long time, but I have no idea what "wet load fresh water" and "wet launch fresh water" means. So you need someone to carry a bucket of Mississippi water to Alabama?Need help finding a company that will wet load fresh water in Madison, Mississippi. Then wet launch fresh water in Decatur, Alabama.
No, I need to change that sig. the boat I’m needed transported in a Sea Ray 380. So what do y’all recommend?to answer above....a lot of shippers wont dip their trailer - they want it unloaded by a forklift or travellift, but you already knew that......to the OP - boat size would likely help - is it the 290 listed in your sig?
Thank you!! I’m still learning, so I do not know why a travel lift could not be used. I will make some more calls. Thank you.thats a BIG boat to water load/unload - I wold ask at either marina where you are going to load/unload (or marinas in the locality) if it is common practice in that area, they should know who does it - Why is a travellift not an option? Two possibilities are Ted Zizzo 239-850-6909 (he may just do Fla - not sure) and Darrin Goodman 951-823-7629. Of course, theres always uship as well - just be specific with what you are looking to do
It boat is currently on a land locked lake. The Ross R. Barnett Reservoir.5-7 day trip to run her on her bottom from MS coast to Decatur...Just sayin'...
Ahhh..thought you had said its in saltwater now...sorry...It boat is currently on a land locked lake. The Ross R. Barnett Reservoir.
AL and Miss are limited at 13.6. So you're two inches high. There are more lowboy trailers running around, so I think it should be easier to find someone to haul it. Good luck.I think I have found a transportation company, he can wet load, and wet launch. He wants me to take the arch off, because he doesn’t have a lowboy trailer. He thinks 13.8” is too high. I would rather use a lowboy and take the props off. Suggestions?
Good advise!!AL and Miss are limited at 13.6. So you're two inches high. There are more lowboy trailers running around, so I think it should be easier to find someone to haul it. Good luck.