Shower bilge pump wiring 37 EC

Tim Conner said:

Somehow the wires came loose on my shower bilge pump. It’s in the little tub with the pump and the float switch. There are two black wires coming off the float switch black and brown one coming off the bilge pump. To the right of it is a black wire That the black wire from the bilge pump is connected to. Right next to that is a pair of wires one black and one brown. I think they connect to the filter pump but I’m not sure. anybody know how to properly wire the shower pump?

Click to expand...

Express 390 said:

you need to have a 12 volt tester the Brown an Black wire should be the hot and ground wires . The Brown should be the hot wire, If so then that brown wire goes to any one of the black wires at the float switch the other black wire from the float switch goes to the brown wire at the bilge pump. The two left over black wires go together . Now when you lift the float up the bilge pump should come on

Click to expand...