1987 340 for parts

C

Chopperdr.

Member
May 8, 2019
50
Mississippi
Boat Info
1969 sea ray pachanga
450 hp. Sbc
Mercruiser alpha 2nd gen.

2002 dodge 3500 Cummins pulls them
Engines
Custom 350 sbc
450hp.
Mercruiser alpha 2nd gen.
1987 sea ray 340 parts everything but engine blocks and exhaust.blue canvas enclosure transmissions hatches let me know if you need anything.
 
what kind of generator?
Any seats?
 
Dave4562 said:
what kind of generator?
Any seats?
Click to expand...
I have diesel 7.5 kw onan not in boat runs good needs circulation pump and the seats were just 2 bench type seats 1 fiberglass pedestal.
 
I am interested in the generator. Is it in pretty good shape and what kind of diesel consumption do we have?
 
I'm not sure I figured it up awhile ago i thought it was a little less than a half gallon at half load and .85 GPU at full load
 
Can you send me a pic of the fiberglass pedestal?
 
Yes I will.
 
15837842458283966338636141257190.jpg
 
15837843230801793735103150596843.jpg
 
The generator runs great.it has been sitting in garage for a year or so.i pulled it out a week ago and put a tank to it and battery and fired right off imediately..I was going to put it in my 1994 330 sea ray but I dont think it will fit..
 
I can measure it to be sure but seems about righ.t.make a offer I dont need it .the ol boat is being decommissioned burying it for a tornado shelter .
 
Do you have the fold down ladder that mounts to the swim platform? Also looking for the small ten inch section of pole for the table in the cabin.

Thank you
 
Cbird said:
Do you have the fold down ladder that mounts to the swim platform? Also looking for the small ten inch section of pole for the table in the cabin.

Thank you
Click to expand...
Yes I do have them
 
Which "pole" for table are wanting ..
 
20200818_201031.jpg
 
Do you have the anchors to secure it to the platform? I just purchased my boat and they had a dingy so they removed everything and plugged the holes.
 
I’m looking for a rod to hold the forward hatch on for my 300 Sundancer. Do you have any of that hardware? Also, the wheels from my slider hatch going cockpit to cabin are bad. (One is missing). Not sure if you have good hatch seals for the front hatches? Do you have a windless still?
ive problems ordering this stuff because of covid and lack of dealers covering it anymore. If anyone has a site to recommend buying this stuff, I would appreciate it.
Also, location?
 
Cbird said:
Do you have the anchors to secure it to the platform? I just purchased my boat and they had a dingy so they removed everything and plugged the holes.
Click to expand...
Yes I do have all mounting brackets
 
You must log in or register to reply here.

Forum statistics

Threads
113,116
Messages
1,426,393
Members
61,028
Latest member
ddbyrd329
Back
Top