bbwhitejr
Well-Known Member
If like this, the fitting unscrews from the tank....
Bennett
Bennett
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
The gauge on my holding tank has all the lights on, even if pumped out. It was not obvious how to pull and clean the sensors (the wires run through a separate bulkhead fitting on top, but the fitting does not have threads that I could see). How does one pull and clean the sensors?
The gauge on my holding tank has all the lights on, even if pumped out. It was not obvious how to pull and clean the sensors (the wires run through a separate bulkhead fitting on top, but the fitting does not have threads that I could see). How does one pull and clean the sensors?
Check out this link for Noflex Digestor 10% OFF with free shipping for a limited time.
https://www.boatersmate.com//10-off-noflex-digestor
Contact me with questions or comments. Appreciate ya. Kat@boatersmate.com
When you're smiling, the whole world smiles with you! Appreciate ya!Thanks Kat! Just ordered
i am very interested in an answer to that question, i have same issue, can the sensors be removed ?The gauge on my holding tank has all the lights on, even if pumped out. It was not obvious how to pull and clean the sensors (the wires run through a separate bulkhead fitting on top, but the fitting does not have threads that I could see). How does one pull and clean the sensors?
In your opinion , do you just pop them with a screw driver? Does not see to have any nutIt's probably clogged up, with poo, someone else's I pulled one apart on my sold Regal 3780, cleaned it, and it started working again. Some here claim switching to this will help as well: https://www.amazon.com/dp/B07C7HRV4P?psc=1&ref=ppx_yo2ov_dt_b_product_details
I switched to it for other reasons and I am happy so far.
And we’re off ….In your opinion , do you just pop them with a screw driver? Does not see to have any nut
In your opinion , do you just pop them with a screw driver? Does not see to have any nut
thanks will give it a go tomorrow and report backYes gently prying up with a flat bladed screw driver.
Bennett