toddh
Active Member
I would like to replace my from hatch door. It has been beat up by the previous owner. Any idea where I could find one?
Thanks!
Thanks!
260 Sundeck front hatch
- Thread starter toddh
- Start date
Espos4
Well-Known Member
Can you put some more info into your signature?
What year is the boat?
Used parts like that are hard to find.
How about posting a picture of the hatch showing it’s damage.
You may be better off having the fiberglass and gel coat repaired on your existing hatch.
What year is the boat?
Used parts like that are hard to find.
How about posting a picture of the hatch showing it’s damage.
You may be better off having the fiberglass and gel coat repaired on your existing hatch.
toddh
Active Member
Its a 2007 model.
Esposa - are you viewing on your phone? Turn it sideways and his info should show up. Otherwise, that's strange you don't see it. He has an '07 260 Sundeck.
As far as the answer goes - ditto to what you said.
Maybe you'll get lucky... maybe... and be able to find one through a marine salvage yard by googling. Maybe.
As far as the answer goes - ditto to what you said.
Maybe you'll get lucky... maybe... and be able to find one through a marine salvage yard by googling. Maybe.
Espos4
Well-Known Member
Oops.......Missed it. I saw the profile info but skipped over the signature.
Yes, I know about turning the phone sideways, thanks
boatmailster
Well-Known Member
Are you talking about deck hatch? Just measure size and they are available.
What "deck hatch" are you referring to? Are you thinking the kind used on a cruiser? The opening kind that is typically smoked plexi? The OP has a Sundeck.
toddh
Active Member
It the front hatch that holds the anchor. Very front of the bow.
Knott Today
New Member
- Aug 13, 2019
- 20
- Boat Info
- 260 Sundancer 2005
350 Mag Br 3
Raymarine C70
- Engines
- 350 Mag w Bravo 3
Try Boat Outfitters... they may be able to build one for you from the old one
Steve Craig
Member
I had to replace the rear cover over the bilge exhaust fans a couple years ago. Molded/vacuum formed plastic, not fiberglass. " Discontinued" at Sea Ray, however, I was able to source the original manufacturer by a P/N on the underside. Took a Winter of searching & a couple phone calls. Manufacturer's business had been sold a couple times & a 3rd or 4th party ended up with a warehouse full of parts. Still out there if you have the patience.
