captkerry
New Member
Visiting grandchildren locked head door from the inside and closed it. How do I get it open. Hinges don't seem too easy to remove.
LOCKED OUT-
- Thread starter captkerry
- Start date
- Jun 5, 2016
- 5,572
- Boat Info
- 410 Sundancer
2001
12" Axiom and 9" Axiom+ MFD
- Engines
- Cat 3126 V-Drives
Is there a pin hole that you can stick a tool in and unlock?
MonacoMike
Well-Known Member
- Sep 15, 2009
- 14,721
- Boat Info
- 2000 Cruisers 3870
8.2 Mercs
- Engines
- 85 Sea Ray Monaco 197
260hp Alpha 1
Post a picture if that does not work and someone will know how to unlock it.
MM
MM
FootballFan
Well-Known Member
Every SR I have been on has the pin hole to open the lock.
Jaybeaux
Well-Known Member
- Jan 3, 2016
- 2,053
- Boat Info
- 2006 Sea Ray 48
Naught On Call
- Engines
- Cummins QSC-540s with V-Drives
11 KW Onan Genset
Paper clip works fine
bbwhitejr
Well-Known Member
Boat Guy
Well-Known Member
- May 15, 2013
- 2,289
- Boat Info
- 400 DA
- Engines
- CAT 3116s
There is no pinhole on mine. If you have the same style as me, I think you will need to either see if you can get a blunt knife or something similar around the backside of the latch and push it in, or take an allen wrench and remove the handle and then with a screwdriver remove the plate and see if you can physically get to the lever.
hd2002hd
Member
- Jul 20, 2010
- 457
- Boat Info
- 1996-Sea Ray 215 Express Cruiser/1996-Sea Ray 330 Sundancer/1998-Sea Ray 400 Sundancer/1996-Sea Rayd
- Engines
- 5.7 Mercruiser/454's/454's w/V drive/120HP
I had the set screw on a door handle get loose and the handle fell off. I just took two screw drivers and worked the latch back far enough to get the door open.
