Ricky Hill
New Member
- Jun 8, 2019
- 3
- Boat Info
- Seville 19
- Engines
- 4.3l 175/V6
I have a Seville 19 bow rider and I noticed that on one side the bolts that hold the motor mount to the hull appear to be loose. They are an inch above the mount, while on the other side the are flush with the mounting bracket and tight.
I tried to tighten the bolts that are sticking up but they don't seem to tighten. I can't see how they are mounted to the hull as where they are bolted down is an enclosed area.
I am looking for a diagram to see how the motor mount bracket is bolted to the hull. Or are they just lag bolts screwed to the fiberglass?
My motor is a Mercruiser 4.3L 175 V6.
Thanks.
Ricky
I tried to tighten the bolts that are sticking up but they don't seem to tighten. I can't see how they are mounted to the hull as where they are bolted down is an enclosed area.
I am looking for a diagram to see how the motor mount bracket is bolted to the hull. Or are they just lag bolts screwed to the fiberglass?
My motor is a Mercruiser 4.3L 175 V6.
Thanks.
Ricky