boatman37
Well-Known Member
- Jun 6, 2015
- 4,211
- Boat Info
- 2006 Crownline 250CR. 5.7 Merc BIII
Previous: 1986 Sea Ray 250 Sundancer. 260 Merc Alpha 1 Gen 1
- Engines
- 5.7 Merc BIII
Thanks guys. Will try this tomorrow. Have the day off and planning to work on it all day. Wife has to take her car in for oil change so I may be forced to go with her....lol.
I don't think there is a hose restriction cause I can blow through it pretty easily but will try water. It could be that the pump can't pump it uphill? But the original was an 800 GPH, same as I replaced it with.
There is also no power to that pump using the right connector. I am borrowing the connector from the mid cabin bilge pump to power it for now. Can't find that issue either. Have other things to do to get it ready and we will probably never shower on it so not going to spend too much time on this until I get everything else ready. Just that I had to remove my cabin steps to get to it and wanted to get it fixed before I put it back together.
I'll try the water tomorrow and report back
I don't think there is a hose restriction cause I can blow through it pretty easily but will try water. It could be that the pump can't pump it uphill? But the original was an 800 GPH, same as I replaced it with.
There is also no power to that pump using the right connector. I am borrowing the connector from the mid cabin bilge pump to power it for now. Can't find that issue either. Have other things to do to get it ready and we will probably never shower on it so not going to spend too much time on this until I get everything else ready. Just that I had to remove my cabin steps to get to it and wanted to get it fixed before I put it back together.
I'll try the water tomorrow and report back