33' Fisher Canvas Boat Cover

stephenm27

stephenm27

Active Member
Nov 3, 2009
526
Milton, GA
Boat Info
2021 Jeanneau NC 1095
Engines
2 x Yamaha F300
I have a Fisher Canvas (http://www.fishercanvas.com/) boat cover that I'm no longer using that I'd like to sell. I bought it used in 2016 and used it one season (boat now stored indoors). It's in great shape as it's been rolled up and stored in the garage since last use.

The cover was manufactured for a 33' Sundancer (with arch + radar pocket) but I used it on my 31' Sundancer with no issues. It's great for protecting the boat through mild/harsh winter conditions while on the hard.

If you're interested, let me know and I'll send a couple pics of the cover on my boat...can also answer any questions you might have.
 
I might be interested if it would fit my 2009 330DA. Is it one piece? Is it made of the heavy grey cotton canvas that Fisher typically uses? Does it require any framing to be set up on the boat? Is it difficult for two people to lift it into place on a boat that size? Thanks.
 
lawndoctor said:
I might be interested if it would fit my 2009 330DA. Is it one piece? Is it made of the heavy grey cotton canvas that Fisher typically uses? Does it require any framing to be set up on the boat? Is it difficult for two people to lift it into place on a boat that size? Thanks.
Click to expand...
Yes, it is one piece. And yes, it’s the grey heavy canvas that Fisher terms a “winter cover”. It is heavy. I’d guess about 100 lbs. I certainly wouldn’t want to use it more than a few times per year as the hardest part is getting it up over the arch. It’s definitely a two person activity. I was told the original owner had it made for his 330 DA so fitting would probably be ok. I’ll post a pic of it on my boat later this evening when I return home...
 
Here's a couple of photos of the cover...you can see it was a bit "large" for my 2009 310 DA but worked great.

uc


uc
 
Thanks for posting the photos. We have one of these on our 225WE and it is a great cover, but even in that size it is heavy to get up on deck and over the windshield. I think if we go down this path with our 330DA, we’ll have Fisher custom make it for our boat, and have them make it in sections so we can get it on and off the boat a bit easier. Thanks again.
 
lawndoctor said:
...have them make it in sections so we can get it on and off the boat a bit easier. Thanks again.
Click to expand...

No problem re photos. I contemplated having Fisher section it into 2 pieces when I bought (used) it but I knew that I was only going to need it for a season, I elected not to. In hindsight, it would be a wise move to do (and I would have it done now locally if I needed to continue using it).
 
Hi
how much are you asking I have a 95 330 im guessing it should be close? Can you go on the boat and check on things while its covered?

Saverio
 
The rear port side of the cover has a large (walk/crawl through) u-shaped zipper that allows easy access while the cover is on. Unfortunately, the few pics I have of it on my boat don't include one from the rear that would show it.

I would think a 95 330 would be close to fitting ok.

I paid $1200 for it in 2016. It was 2 seasons old at that point. It has sat folded/rolled in my garage since spring 2017. I now have a garage for the boat and so it's sitting there wanting a new home.

I have no established asking price, private message me and we'll probably be able to work something out...
 
stephenm27 said:
I have a Fisher Canvas (http://www.fishercanvas.com/) boat cover that I'm no longer using that I'd like to sell. I bought it used in 2016 and used it one season (boat now stored indoors). It's in great shape as it's been rolled up and stored in the garage since last use.

The cover was manufactured for a 33' Sundancer (with arch + radar pocket) but I used it on my 31' Sundancer with no issues. It's great for protecting the boat through mild/harsh winter conditions while on the hard.

If you're interested, let me know and I'll send a couple pics of the cover on my boat...can also answer any questions you might have.
Click to expand...
stephenm27 said:
The rear port side of the cover has a large (walk/crawl through) u-shaped zipper that allows easy access while the cover is on. Unfortunately, the few pics I have of it on my boat don't include one from the rear that would show it.

I would think a 95 330 would be close to fitting ok.

I paid $1200 for it in 2016. It was 2 seasons old at that point. It has sat folded/rolled in my garage since spring 2017. I now have a garage for the boat and so it's sitting there wanting a new home.

I have no established asking price, private message me and we'll probably be able to work something out...
Click to expand...
Do you still have this cover? what are you asking for it?
sailorjk
 
Did you read the post?
 
Literally the 2 posts above his! Hahaha!!
 

Attachments

  • Screenshot_20181118-151826_Chrome.jpg
    Screenshot_20181118-151826_Chrome.jpg
    61.3 KB · Views: 133
This is going to turn into an Abbot and Costello “Who’s on first” !!
 
stephenm27 said:
I have a Fisher Canvas (http://www.fishercanvas.com/) boat cover that I'm no longer using that I'd like to sell. I bought it used in 2016 and used it one season (boat now stored indoors). It's in great shape as it's been rolled up and stored in the garage since last use.

The cover was manufactured for a 33' Sundancer (with arch + radar pocket) but I used it on my 31' Sundancer with no issues. It's great for protecting the boat through mild/harsh winter conditions while on the hard.

If you're interested, let me know and I'll send a couple pics of the cover on my boat...can also answer any questions you might have.
Click to expand...

Is this still available?
 
You must log in or register to reply here.

Forum statistics

Threads
113,118
Messages
1,426,556
Members
61,035
Latest member
Lukerney
Back
Top