Just Recondition 2 ea L/R Hand Nibral 21" x 23 Pitch off a 40' Sundancer

ChuckV

ChuckV

New Member
Nov 10, 2018
14
Destin and Lafayette, LA.
Boat Info
Just purchased 2006 Sundancer 40 with Cummins and all new Garmin duel 12" and autopilot.
Engines
Cummins 5.9 HO
These came off the 40' Sundancer I just purchased. The owner had another set and had to put those on because the prop shop couldn't make the date for getting everything done. IMG_0679.JPG IMG_0681.JPG
 

Attachments

  • Nibral 21 by 23 4B 110118 prop reports.pdf
    998.9 KB · Views: 269
How much are you asking for them? I have 22x23's on mine. Not sure what 21 vs. 22 would do to performance.
 
which engines do you have? Gas or Diesel? Generally speaking, the 21 vrs 22 pitch would lift the boat better, but it all depends on which engines you are running.
 
Hi my name is Chris I would like to know what size shaft will fit on those props and your asking price
 
Hi my name is Chris can you tell me what size shaft will fit those props and how much you're asking
 
Chris Tsoukalos said:
Hi my name is Chris can you tell me what size shaft will fit those props and how much you're asking
Click to expand...
$1400 each + Shipping, I "think" the shaft size is 1.5". They came off of 2006 40' Sundancer with Cummins 5.9 380HP
 
I'll save you guys some trouble. OP's sig says Cummins for power. I'd bet the farm they are 1-3/4" shaft size. The 370s are 1-1/2". Even with hub inserts (wanna buy a pair?), the hub is too thick to properly seat on a 370 shaft and get the nut on. So, I too have a pair from a 40 Sedan Bridge, 2000, that were the spares. They are anti-fouling painted as I was trying to install them on my 370, but basically unused. West coast of Florida. Start a conversation with me if you want to pursue owning them.
 
370Dancer said:
I'll save you guys some trouble. OP's sig says Cummins for power. I'd bet the farm they are 1-3/4" shaft size. The 370s are 1-1/2". Even with hub inserts (wanna buy a pair?), the hub is too thick to properly seat on a 370 shaft and get the nut on. So, I too have a pair from a 40 Sedan Bridge, 2000, that were the spares. They are anti-fouling painted as I was trying to install them on my 370, but basically unused. West coast of Florida. Start a conversation with me if you want to pursue owning them.
Click to expand...
So you have a set that are 1-3/4 or the 1.5 which I was looking for originally?
 
370Dancer said:
I'll save you guys some trouble. OP's sig says Cummins for power. I'd bet the farm they are 1-3/4" shaft size. The 370s are 1-1/2". Even with hub inserts (wanna buy a pair?), the hub is too thick to properly seat on a 370 shaft and get the nut on. So, I too have a pair from a 40 Sedan Bridge, 2000, that were the spares. They are anti-fouling painted as I was trying to install them on my 370, but basically unused. West coast of Florida. Start a conversation with me if you want to pursue owning them.
Click to expand...

Still have these for sale? Can you PM if you do?
 
You must log in or register to reply here.

Forum statistics

Threads
113,123
Messages
1,426,626
Members
61,037
Latest member
wojozobl
Back
Top