I've bought the Plasteak holly teak sheet flooring has any one installed this and what tips do you have.Going to be pulling up the carpet in my 310.Plan on removing the dinette and the sole plate by the sink to make install easier.
help with plasteak flooring
- Thread starter dvx216
- Start date
- Jun 2, 2008
- 5,023
- Boat Info
- 1998 450 Sundancer, Achilles dinghy w/15hp
- Engines
- 3126 Cat's
Did mine last year. This product was purchased off of E-Bay.
Use 6mil plastic (available from any home store) to make a template of the floor.
Take your time taping it down as you flatten it out (I cut small holes in the plastic as I go and place duct tape over holes to secure it).
Use a sharpie to mark the perimeter.
If your template fit is perfect, your flooring will be also.
P.S - write "top" on the template so you don't make your flooring upside down!
Take your time taping it down as you flatten it out (I cut small holes in the plastic as I go and place duct tape over holes to secure it).
Use a sharpie to mark the perimeter.
If your template fit is perfect, your flooring will be also.
P.S - write "top" on the template so you don't make your flooring upside down!
Express 390
Well-Known Member
- Sep 14, 2018
- 661
- Boat Info
- 1986 SeaRay 390 EC
1993 SeaRay 290 DA single 7.4 /Bravo 2
1992 SeaRay 230 DA 4.3LX Alfa drive
- Engines
- Twin 454 Crusaders inboards 4 blades
What was used on the install to hold it down?
gmacd81
Active Member
- Sep 2, 2014
- 190
- Boat Info
- 2002 460DA hardtop, Raymarine eS128 & eS75, Evolution AP, SHD color radar, Ray260
Walker Bay w 40hp
- Engines
- Cummins 6CTA M3's, Onan 11.5 kW genset
Is that the EZ Boat Sole product? If so, there are a couple of folks who posted doing that project in the last couple of years. You should be able to get some good pointers. I also plan to tackle the saloon floor this year or next. One thing I recall hearing is that the key is floor prep after removing the carpet. You need to get the floor absolutely flat and smooth.
Sheet vinyl EZ sole is a click together product.
- Jun 2, 2008
- 5,023
- Boat Info
- 1998 450 Sundancer, Achilles dinghy w/15hp
- Engines
- 3126 Cat's
3m peel & stick is already on the backside.
Saverio
Well-Known Member
- Aug 31, 2010
- 1,503
- Boat Info
- 1995 450 DA
- Engines
- Cat 3126 420hp
900 hours Westerbeek Generator
I did my cabin and stairs last spring with plasteak. its easy to work with. just getting the carpet up and making smooth. also the floor contours to the side makes it challenging
Saverio
Saverio
