Recent content by Vince_nj1

  1. Vince_nj1

    Generator starts on its own?

    I called Kohler and they suggested that there is a bad wire somewhere. Didn’t provide much help. I took the panel off in the cabin and everything looked fine. I have not had a chance to poke around in the bilge yet.
  2. Vince_nj1

    Generator starts on its own?

    Thanks for your reply. I read the other thread about low battery voltage monitor that turns the generator on. I have owned my boat since 2009. My boat does not have that. Never heard of something like that on a gas marine generator that calls for the using the blower to vent the bilge before...
  3. Vince_nj1

    Generator starts on its own?

    My Kohler generator has developed a new gremlin. With the switch on the generator set to Automatic, the generator starts on its own. It started the other week when I slept on the boat. Boat was plugged in on shore power, with the air conditioning running. In the middle of the night the...
  4. Vince_nj1

    Who's NOT boating this season due to COVID?

    We are on lock down in NJ with only essential businesses open. I don't think I can get my boat launched and I don't think my marina is open. Hoping this will change by mid May
  5. Vince_nj1

    Who runs a 320 or smaller Dancer in open water?

    If you are going in the ocean and it is a little rough make sure your store your coffee pot in a safe place. Next to impossible to find a replacement if it bounces out and breaks. You will usually have a following sea in the summer going up the coast of NJ and a head sea coming back so expect...
  6. Vince_nj1

    Plug for Fuel pump relay damaged - How do I fix this? See Pic

    I forgot that you also need this (which has a relay with it) GM / Delphi Sealed Metri-Pack ( Metripack ) 280 Medium Current Sealed Relay Kit SPDT 30 AMP Part # CONN-75575 Pricing 1 + $19.49
  7. Vince_nj1

    Plug for Fuel pump relay damaged - How do I fix this? See Pic

    You will need a removal tool, a crimp tool, various replacement connectors and new relay from Ballenger Motor Sports. This is what I ordered, I may have ordered some metripack that I didnt need, but it was cheap enough I didn't care...
  8. Vince_nj1

    What is the longest run you have done in one day on your searay?

    I used to take a 30ft Sea Ray from Bayonne out to Jones Beach and back for the day. Usually the morning ride was nice and smooth, but the return was almost always nasty. Unable to get on plane, burning fuel and being punished. Martha's Vineyard is a long stretch of open water. Sea conditions...
  9. Vince_nj1

    Re-set Vessel View Thermometer

    I have the same issue. Do you have a 2nd transducer for a fish finder? I do. when I first installed the 2nd transducer everything worked fine, but after a few seasons I started getting bad temperature readings on the Vessel view. If I turn off my C80 I get an accurate reading. No idea...
  10. Vince_nj1

    2017 Memorial Day Raft-up in Zach's Bay

    I saw you guys on the bay and took some video. Going to the event was a last minute decision so I didn't want to crash your party. Filmed with a DJI Mavic. I only have it a week, so my filming is a little choppy. Enjoy. https://www.youtube.com/watch?v=PGZrvkMyge0
  11. Vince_nj1

    CRUISAIR SMART TOUCH CABIN CONTROL - Can I use it?

    Ron Since posting, I contacted them and they told me it was compatible and that I just needed a bezel. I ordered it and it shipped already, with the 20% discount total came to $244.80. I should have it for the weekend and will install and report back if how compatible it actually is.
  12. Vince_nj1

    CRUISAIR SMART TOUCH CABIN CONTROL - Can I use it?

    My 2006 320 has this thermostat control in the cabin It has been acting up and it will not let me change the desired temperature. I have been checking wires and playing around with it and everyone now and then it decides to cooperate, but it is not working again this year. I found are...
  13. Vince_nj1

    Official 320 Dancer Thread

  14. Vince_nj1

    2006 320 Question

    Great choice of a boat :smt001 I see your over in Brielle. The currents on the Manasquan river can make docking quite exciting.:smt001 If you are new to boating I would suggest practicing docking at slack tide. This forum is a great place to get advice.
  15. Vince_nj1

    New 320 Sundancer

    Is it a hard top? Why is it black? Could that be Canvas? Nothing is mounted in that area.
Back
Top