Recent content by TN Boatman

(98 Dancer) I have 3 batteries and that have lived their life so decided to replace all 3. There are two deep cycle and one starting. I replaced and hooked them up according to how they were done when I received them from previous owner. All has been working fine but got to wondering if they...

Just had it checked out. 120v at panel and 13v at unit so a breakdown along the way. Pulling new wire to unit so hopefully will be good. Don’t really need other than has to be running to winterize.

1998 Sundancer-A/C has stopped working. Will not power on. All other items at panel (outlets, AC Converter, Microwave, etc.) are working fine. With main and A/C switches on, the unit/thermostat will not power up. I have looked everywhere for a breaker specific to the A/C and cannot locate. Is...

Still investigating. Put on hold for the holidays but had to drop in hose manually and pump. Not sure why I can hear “sucking” sound through vents and not creating suction.

Tank is fairly full just by tapping on side. Thought of shining light today but did not have with me. I do not have guage for level and planned to pull the 90 elbow on top. There is only a few inches of clearance but will be able to see if tube is there. Stay tuned.

Ran water down with no resistance. Can hear air sucking at side vents. Harbormaster suggested that the pick up tube from waste vacuum hose could have “fallen off” therefore not sucking from bottom. Makes sence. Can that happen? I will pull this weekend to see but certainally seem like a possibility.

I have to believe something simple. I use the dissolving pods a couple of times a year. The girls all use marine/RV paper and to my knowledge nothing else has been in as all users are also boaters. No wipes, tampons or other unfriendlys should be present. I’ll be digging in tomorrow

We have never had solids issues but a clog is certainally possible. Good thought will try that tomorrow!

Sorry, Pumping out from pump station hose at marina.

Yes, pump works fine and I do prime it too. Others are not having an issue.

Recently, I have been having trouble pumping out head. I can hear air/suction through vent tube but pump will not extract waste from tank. Could this be a valve issue? I have a 98 Dancer with vacu flush and Macerator. Never had issue before but seems like it will not create suction and pull gray...

Amazon and they come with the individual labels or can get the ones already with labels on them https://www.amazon.com/Daystar-Universal-Rocker-KU80014-America/dp/B001GH5PX8/ref=sr_1_11?s=automotive&ie=UTF8&qid=1531854217&sr=1-11&keywords=marine+rocker+switch+red

Thank you. For $20 worth a try. The co-captain has been on me for a while about this so just ordered. Thanks for the response!

I have a 98 270 dancer and need the toilet seat replaced (aged discoloration). The lid is OK but may be an assembly. Its a vacuflush head and can not locate a model or S/N anywhere. Any insight on how to get the correct one?

Will double check but if reservoir is full then warning alarm should go off or does alarm tell you more than I am aware of?