Recent content by TheBells13

Scuma, they actually pry out, with a screwdriver but they're very tight. And they bend easily, i had to 're-shape' them when i was done. And be careful not to damage the surrounding head cloth. the G4 lamp work good in those fittings.

Yes they are the actual ones. Ref the 42mm festoon bulbs. Don't get carried away with the amount of Led's. my last boat had 8 LEDs per bulb and I could turn them on at night. It was blinding. I would err on the low side if your concerned. But for the prices of 3 or 4 bucks, you can buy a few...

BJAC, my Sundancer is a 2004, so yours should be the same. Ref finding them on Amazon, links below for the ones i bought. http://www.amazon.com/White-Omni-Wedge-Bulb-2825/dp/B004Z3JWM0/ref=sr_1_11?ie=UTF8&qid=1366473076&sr=8-11&keywords=led+wedge+lamp...

Hey Scuma, your timing is perfect. I just did a whole lighting survey on the weekend. I converted my previous boat, a 370 aft cabin to all LED's an it looks awesome, so just starting to do it with my 320. So here's what you need; 42mm Festoon LED's for Swim platform x 1, Cockpit lower lights...

I folks. Just bought a 2004 320DA at the tail of last year. Getting ready for this season. Has anybody tried installing a barbecue grill mount on it? The natural place looks like the swim ladder cover, but I want the ladder accessible during the afternoons. Thinking about rear left of the swim...

At 3000-3400 rpm I'd expect 18-22mph if you plane it, cut it back and re-trim she'll cruise pretty nice. Sorry she's put away for winter, or I'd take here out and post a video for you.

I've got a 370AC with the Horizons. I've had it up to 35mph loaded. Normally 8-10 mph at 1200-1500 rpm. She revs pretty good for a big girl. But we normally just cruise along at 7-10 mph. The throttles all the way forward is just showing off to guests, to see the size of the hole she leaves...

I did it on my 370AC. You have to remove the tv and base to access the mirror fixings from the tv compartment, then you pull out the bottom of the mirror to remove it. 1/2" wrench is need to adjust the door hangers on the runner.