Recent content by stu1

Not tried that??? I will try that tomorrow.

Hi, I am wondering if you could help me and my mercury mechanic in trying to fix an intermittent problem. My boat cuts out on me at irregular, obscure no pattern time. Its as if someone has gently turned the ignition key to off and when I restart the boat, it is as if nothing had ever happened...

You could try factory reset on the smart craft. The manual will let you know how to do it. If you don't have a copy then email me at stuarthur@blueyonder.co.uk and I forward.

Hi don't know if this helps as its primarily for the UK. But the box is the size of a pack of cards and works brilliant. There must be a similar system in America. Link:- http://www.three.co.uk/Discover/Devices/Huawei/E5330_Mobile_Wi-Fi?memory=0&colour=White

Hi I have a 240 Sundancer, year 2007 which I bought at the end of last year. The transducer was working fine for the first 2 outings but then appeared to disappear and show only 3 dashes instead of a depth reading. When I got back to the mooring and turned the smart craft system back on it shows...

Hi could anyone advise me how to turn on my gauge lights. Thanks in advance.

Hi can anyone tell me how to my gauge lights on. I have just bought the boat so need a wee bit of help. Thanks in advance

Hi I have purchased the proper 8 pin extension and they work fine. Thanks. Now I have to run the extension from the remote to the stereo. Do you have any ideas on the easiest way to do this.

I have just bought a boat with the Clarion CMD6 stereo. The wired remote control has power but no functions are showing up, on further investigation the stereo was not connected up. It seems that there is a 6pin cable floating about behind the system but both the stereo and remote control are 8...

Hi could anyone give some tips to where I could purchase a galley corner post that is missing and needs replace. Than I advance. Stuart

Could anyone advise where the depth sounder gauge on the 240 sundancer 2007 is. Thanks