Recent content by Stromeister

Swapped the breaker with the starboard side and made the 2 hour trip home this afternoon without reoccurrence. Have you guys found a good source for the 10amp breaker? I'd like to keep one on the boat in case the issue arises again.

We have a 2003 410 Sundancer with 3126 Cats and a new issue has surfaced with the ignition breaker in the circuit panel intermittently tripping and killing the port engine. We can be cruising at 20 knots and the port engine will shut down and when we reset the breaker in the circuit panel, it...

We have a 2003 410 Sundancer with 3126 Cats and a new issue has surfaced with the ignition breaker in the circuit panel intermittently tripping and killing the port engine. We can be cruising at 20 knots and the port engine will shut down and when we reset the breaker in the circuit panel, it...

Changed my starting routine this weekend and tried some of the suggestions on this thread. Place the start switch to run and pushed throttle to full position and then returned to idle and proceeded to engaged the starter. Engine starts right up. Seems odd that I've never had to perform this in...

Thanks for the info, Frank! I will try your recommendation later this week when I next pay a visit to the boat. Thanks again.

Thanks Mark. That's the first thing I did when the problem surfaced was to prime the lines and close the valve.

I have a 2003 410 Sundancer with 3126 Cats that recently had the top rack adjustment (valves and injectors) as part of the 250 hour service (currently have 300 hours on motor) and now the starboard engine is hard to start when it has been sitting longer then 20 minutes. The engine will crank for...

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread Thanks JVM225! Appreciate the info.

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread Definitely like the look.

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread We like the upgrade of the stainless steel sink and faucet as the picture Ken referenced in the previous post. Which post did the picture come from or does anyone know the part numbers and place of purchase?

Do you have any part number or URL to reference?

PM Sent.

Entered!

Re: 410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread Beautiful Boat!! Congratulations and may you spend many hours enjoying her.

Good tip. Sent from my iPhone using Tapatalk