Recent content by Steve500dancer

I did increase the rpms of the generator and watched to see if I had a voltage increase and had absolutely no change in the voltage.

Does it sound like a voltage regulator to you

this weekend I had my boat out at an event and the generator was running fine and the air conditioning was on. I went and had a bite to eat and when I got back the generator was running and the air was off. The voltage meter on the panel showed 25volts. I checked the fuse and it was fine. For...

All fixed Sent from my iPad using Tapatalk

Ok I have an update on my issue. We now rebuilt the starboard side shifter and still have no fluid coming out from the bleeder at the std slave. Blew out all the lines and pressurized the system and nothing. It is almost like the exchange valve is stopped up. However we removed the valve from...

Today I vacuumed out the condenser and ran compressed air through the condenser and it still shut down even with compressed air pushing through the condenser. Just a minute or two away from throwing the u it in the lake Sent from my iPad using Tapatalk

Yes you can but the tech actually told me that they no longer put the lower pressure switch on units and that I can bypass it and not worry about it Sent from my iPad using Tapatalk

It will be for the windless. Sent from my iPad using Tapatalk

I spoke with Cruise Air and they think it is a low pressure switch issue. Sent from my iPad using Tapatalk

Yes it is blowing great. No obstructions at all Sent from my iPad using Tapatalk

Yes it is cruise air Sent from my iPad using Tapatalk

I really don't think that the water is the issue. The flow from the unit is very good. Probably better then it has ever been Sent from my iPad using Tapatalk

So after fighting with the A/C u it for the past 4 Days I am stumped. I used Barnicle Buster on Friday and let it sit and bust loose all the crap for 6 hours before I restarted the unit and to my surprise, it made absolutely no difference. The unit in my guest bedroom will run for 2 minutes and...

Aft r rebuilding the port side shifter lever at the helm we went to refill the system and purge out the air. Worked great on the port side that required the rebuild. However after hours and hours of trying to get fluid to the starboard side helm shifter we can't get it to bleed. We have tried...

We got the port side rebuilt and all is fine with the port now and for some reason we can't get the starboard side to pressurize. We have to be missing something stupid. We remover the bleeder completely and no fluid comes out at all. We even tried to blow air through the lines and can't even...