Guys, a neat trick for breaking loose plugs sealed with a copper washer is to hit the head of the plug with a hammer or something similar. Plug will then come right out. You don't normally need to hit it very hard either.
Ed
I take mine on/off by hand but with gloves on as the brass casting has sharp edges on it that will slice your hand. Rinse the basket out then reinstall. - Ed
Thanks for the replies. I plan on sucking out the old fluid with my oil change pump which will likely not remove all the old fluid. Is the full synthetic still compatible if there is approx a quart of the old left? I purchased the Valvoline stuff. Should be years before I have to do it again...
Was at Meijer today to buy new Trans fluid for my ZF Hurth trannys and they did not have enough of the Dexron III, so I purchased the Valvoline Full synthetic Dexron VI. Is this better and alright for my trannys that require Dexron III fluid.
Thanks!
I thought I had heard that core rot can begin at around 25%. Is this a myth? I had one small area in front of my port windshield that registered about 17% during the survey and the surveyor was "concerned" with that spot too. What gives??
Sorry, forgot to add that it also over-rides the systems monitoring on the genset (like oil pressure, etc.) to allow the generator to reach operating conditions.
Try Seaview Electronics in Clinton Township, Michigan. I found a like new tridata cover and a cover for my RL70C that is in very good shape there just a month or so ago. Talk to Gary, who is the owner. I too could not find them anywhere else. When you find some newer ones, make sure you keep...
Used them last year and was happy with the service; however I found better rates and better coverage with Charter Lakes out of the West side of Michigan and am im the process of transferring to one of their underwriters. Might be worth checking them too.
Enjoy your trip.
So far...
1. Replace complete canvas package with custom canvas (glad I haven't had to do this before $$$)
2. New cutlass bearings and engines aligned
3. Replaced main breaker switches in galley electrical panel due to burned out bulbs
4. Considering replacing cockpit cup holders with stainless...