Shaps's Recent Activity

  1. Shaps liked KevinC's post in the thread Idles high and low then stalls.

    Maybe this link will help with diag on an IAC: https://toolsgalorehq.com/measurement-tools/multimeter/how-to-test-iac-with-multimeter/...

    May 26, 2022 at 3:27 PM
  2. Shaps replied to the thread Aging bodies and keeping up with maintenance..

    i replaced with these https://www.scandvik.com/index.cfm?method=products_detail&productID=318 big difference!

    May 26, 2022 at 2:01 PM
  3. Shaps liked Blueone's post in the thread Indy 500.

    I am a huge fan of this raceā€¦.. before the big boat I had 30 tickets in tower terrace and corner two. Wife would leave for the weekend...

    2EFAA89C-E444-4781-B800-CCF0A54D482C.jpeg May 26, 2022 at 12:46 PM
  4. Shaps liked see ray's post in the thread 2022 SPLASH pics.

    FINALY IN THE WATER[ATTACH][ATTACH][ATTACH]

    98B7ED13-8978-4D04-8F8D-94A6058B53B7.jpeg 3919791C-0845-45DB-AB81-300B01A0125F.jpeg 9D43D41E-5768-477D-A5D9-E35D956385EB.jpeg May 26, 2022 at 5:43 AM
  5. Shaps replied to the thread Spring Buff - product change.

    Thank you! Yessir, it does.

    May 26, 2022 at 5:41 AM
  6. Shaps attached a file to the thread Spring Buff - product change.

    Starke ignition Lake County orange forced rotation pad Flex vrg3401 1 coat collinite 885 [ATTACH] [ATTACH]

    PXL_20220526_000941611.MP.jpg PXL_20220526_000916574.MP.jpg May 25, 2022 at 10:11 PM
  7. Shaps replied to the thread 48 DA Owners Club.

    @JB MARSHALL How old are your batteries? As mentioned above, these can be very sensitive to voltage. I think i would make sure I have a...

    May 25, 2022 at 2:11 PM
  8. Shaps liked Gofirstclass's post in the thread Top Gun.

    We have our H1 Unlimited Hydroplane races here every year and our yacht club has a dinner cruise for the pilots and crews of the boats...

    May 24, 2022 at 7:07 PM
  9. Shaps replied to the thread Fall weekend up the Hudson.

    Offer stands GFC!

    May 24, 2022 at 3:19 PM
  10. Shaps liked Gofirstclass's post in the thread Fall weekend up the Hudson.

    Thanks for the invitation. My admiral and I would enjoy the trip, the scenery, and mostly the company!

    May 24, 2022 at 3:18 PM
  11. Shaps liked techmitch's post in the thread Official Caterpillar3116/3126 Thread.

    If it doesn't have any wires going to it, it's not electrical. Sorry, had to.

    May 24, 2022 at 3:16 PM
  12. Shaps replied to the thread 48 DA Owners Club.

    Thank you! Yessir, masking tape, and rubbing alcohol to make it lay down smooth. I used a gloved finger and sprinkled the alcohol on...

    May 24, 2022 at 3:12 PM
  13. Shaps attached a file to the thread 48 DA Owners Club.

    I went the way the factory did it (white on the bottom) and think IT is the way to go. ;) [ATTACH] [ATTACH]

    PXL_20210227_201644813-3.jpg PXL_20210227_211925084.jpg May 24, 2022 at 2:09 PM
  14. Shaps replied to the thread 48 DA Owners Club.

    i'll dig up some pics later, but i used this for the lower windshield and i am going to be using the same for bottom of the side...

    May 24, 2022 at 12:39 PM
  15. Shaps replied to the thread 48 DA Owners Club.

    I have the same grill (came from PO) with a fishing rod holder. When we take it, I keep it on the stbd side, out of the way til we want...

    May 24, 2022 at 9:13 AM
Show Sidebar