haha ok ok i know they are bad. let me rephrase... is there a way to replace these anodes other than replacing the whole cylinder? cylinders are fine. anodes, not so much:)
i was told i have to replace the entire cylinders. probably true but wanted to post here first... thanks. Matt.
https://www.dropbox.com/s/63slgt5xy14zqld/20180425_193704.jpg?dl=0
https://www.dropbox.com/s/bmuanrc1q3tuph8/20180425_193728.jpg?dl=0
for use as a backup to my mounted searchlight i like to carry a handheld spotlight. The one i've had for years was a million candlepower and was great but it recently died so i must replace it. new ones measured in lumens now...the old one was a 12volt and i've noticed most of the newer ones are...
since my old one now resides at the bottom of saginaw bay, im wondering how i can get a replacement support arm piece for my bimini top? just need one... maybe make one? any other suggestions welcome... thanks.
reading around i found that the space below my step in to the cabin is meant for a waste basket? good to know, didn't know that and now i want to utilitze this space for that. is there a basket made for it? i searched for baskets and didn't find one with a matching size... 8.5x11. im gonna...
https://www.anchorexpress.com/Jabsco-Motor-Pump-Assembly-for-37010-Series-Electric-Toilets-37041-0010?gclid=CjwKEAjwpdnJBRC4hcTFtc6fwEkSJABwupNiSNYo-9XLKo54b8voXHTSA_Q6Joriofbd6fIxMV3wIhoCm57w_wcB
would this be the pump that would replace mine if i get just pump? i'm also trying to determine...
Thanks, not my typical line of work:) my latest thoughts are a new pump would be $200. A complete new bowl that comes with that same pump would be around $400 from what I saw online. Would probably be less of a headache for me to put in and/if it all comes attached. Id only have to worry about...
https://www.dropbox.com/sh/db2nah05zas4emf/AACFBD9lwU6VMfE8KN33xVBGa?dl=0
pics of the bottom of the pump where its leaking. also cracked up porcelain and rusted and dry rubber washers at the top of the bowl at the fitting where water comes into the bowl. Can this pump be repaired or i'm...
Well im glad to hear it may be repairable but after winters storage and using it for the first time i sort of assumed it froze and cracked or something. Not repairable. You dont think so? Also the bowl was not holding water and im wondering if this is a separate issue. that repair kit wouldnt...
Says ITT JAbsco 37010 0000 model. That pump i discovered is leaking. Right at the seam in the pump itself. A steady drip. Got it to stop by shuting the valve in the bilge area. I didnt wintrrize it myself but my latest thought is that was missed and now its toast. What do you think? I had a pic...
first run this season with the boat and discovered a totally new problem that we did not have last year. Leaking toilet. seems to be coming out from under the back of the toilet where it meets the floor. first noticed that it would not hold water in the bowl. (porcelain bowl, electric flush...
Went in to west marine for something more heavy duty for the deep stains and he recommended 3m rubbing compound. Id like a second opinion on that...i told him it was for the stains in the nonskid and other products have not worked.