Recent content by Rod Danko

1990 310 EC speakers on the arch are on temp spacers, getting nicer ones made still haven't placed a sub yet

I have an old dedicated transducer that I will remove, so I do have an existing hole I was thinking about a DT800/810 not sure why they cost more than the DST version

1990 330 EC getting new electronics and a nmea 2000 network mfd(s) will be simrad either go9 or nss9 question is; use the transom mount transducer that is usually bundled in or use a thru hull looking for accurate depth, not really much of a fisherman Thanks !!

My deck core was 3/8 balsa just in case anyone else goes looking for the info

plan was to buy premade panels, the area I need to fix is about 18" x 30" Thanks

assuming the deck is a balsa cored layup, does anyone know the thickness of the balsa? boat is hours away and I am gathering materials to repair an area under the horns Thanks !!!

Thanks for all of the responses, I figured out the Micra Nissan connection, I have a gasket set coming so I will pull the head off soon

SO I picked up an old used generator, it has the Nissan 988 (4) cyl hasn't run in god knows how long, hour meter says 433 turns over decently but had no spark, new points and coil installed I now have a healthy spark Problem is I have no compression or vacuum pulled the valve cover, valves move...

Thanks for the info

Which brand did Santa choose ?, I need to replace mine but don't have any experience with the different brands and models available. Thanks !!

Here's what my stairs look like, almost done

I made black laminate panels that cover a large portion of the vertical carpet at the setee left a recess for LED lights behind it, photo below somewhat shows it

I have (1) floor hatch just outside of the head door, It's not quite finished and I don't have photos but I covered the floor, trimmed to the opening with a router bit, covered my hatch doing the same I have a 1/8 strip of stainless steel wrapping the edge of the hatch, plan is this will prevent...

My boat is on Lake Charlevoix (northern Michigan) I live in southern Michigan So it's in winter storage I purchased it in July of this year, so it's fairly new to me. I will work on getting some pics put together of what I'm doing so far I have gutted the cabin, faux wood floor replaced the...

Can an EC squeeze in here, not too many advantages to an EC over a Dancer, but a larger TV is one of them this is a 1990 that I have gutted and in the process of refurbishing