Thanks, let me know. I ended up using a hull through fitting that worked pretty good. I added a drain plug from my local hardware store. The only downside is that is a little raised so that the sink doesn't drain all the way.
So, I received mine. There is a slot at the top, and you just push the tab on the new key/button through it. The tab on the key has some flexibility to it. Make sure that there is no debris in the hole.
I connected to power at the breaker panel under the helm. It worked beautifully. To route the wires, I removed the ceiling panel in the aft berth. When I went to reinstall, there is a large gap at the end. It was hanging a little loose when I removed it. I'm thinking of adding a filler. Has...