The 15.6 x 13 props made a huge difference in the hole shot. Planes off in 10m-15 seconds with a full load of fuel now. Better than expected. WOT turns at 6300 and am able to cruise at 5K rpm at 25 mph. Very happy with the change in performance. Really appreciate the guidance from all who...
Wanted to follow up on this post about the 15.6 x 13 props. It took some doing to find them but we just launched for the season up here in NY and what a difference these props made. (BTW - found the props at Prop Depot out of Tennessee. They were extremely helpful and I would highly recommend...
Just a follow up to the prop discussion. Found a set of 15.6 x 13 props at Prop Depot (Tennessee Propeller). They are the only distributor who had any inventory. Nick (owner) and his team were amazing to work with and full of knowledge and pricing was extremely competitive, plus free...
Is anyone out there running a 4 blade prop on their Venture? If so, what geometry are you running and what performance are you seeing (hole shot, cruise speed & RPM, WOT RPM & Speed)
Been looking for the 3 blade 15.6 x 13 but cannot locate stock anywhere and am hearing that Mercury may have...
Hi. Just saw your post. It's giving me hope we can find a solution to our performances problems. We purchased our Venture a couple of seasons ago. We're having similar issues on our 2014 370 with the hole shot. After you switched to the 15.6 x 13 prop, what RPM and speed do you cruise at...
Yes, so running true would mean a comfortable cruising speed (25-27mph) at a comfortable RPM. With the original 15.3 x 14 wheels, I had to turn 5,200-5,300 to keep the boat on plane at 25MPH, burning close to 35 GPH. Below that speed, the boat starts to squat and fall off plane using auto mode...
Thanks for the thoughts. I wanted to go to a 4 blade prop for the extra lift and mid range performance last season. My guy told me I couldn't get low enough pitch but I see the PowerTech wheels go down to 12". I ended up with a PowerTech16 x 15. I'm really struggling with what is the right...
Thanks for the input. I'm guessing on the OFS4 the pitch would be 13 at most? Do you know anyone running these props? When I re-propped last season my custom guy told me that I couldn't get 4 blade props with a low enough pitch. Guess he was wrong. There are so many options it's hard to...
Thanks for all the feedback people. Regarding trim at hole shot, motors are trimmed al later way down, tabs all the way down, every time.
The props that were on the boat when we purchased it were 15.3 x 14 Enertia. The boat did plane under full load but I did not like cruising at 5,500 rpm to...