Just want to add my experience so far with QSM11s and prop changes that I made. Had boat hauled last year for bottom job. Had been consulting with Tony A. and wanted to work on getting closer to his recommendation. I was burning 24.7 each side at 2000 rpms and was hitting rated rpm at WOT. Had...
UPDATE: Please to report that Baking Soda, Vinegar & Boiling Water worked great. Just took one time but I went ahead and did it 3 times. I put 1/2 cup baking soda on drain, pour 1/2 cup vinegar over it and mixed then added boiling water. I let it sit for about 10 minutes and then ran hot shower...
My drain cover doesn't have screws and seems near impossible to remove from the top side. Bottom side isn't very accessible. Pour design. I have been reading about baking sod/vinager/hot water combo and plan to try that today. Sump is clean and works fine. Will keep you posted.
I have a 2006 52 Sea Ray Sedan Bridge and the shower is draining very slowly. Drives wife crazy!! Is it safe to use Draino or similar product? Sump works fine. I can see shower drain and plastic line to sump but would be nearly impossible to get to the elbow to take it apart to clean. Thanks.
I have a 2006 Sedan Bridge with Cummins . Purchased May 2015 Bought boat with 1700 hours on them. We are now at 1950 hours and have been running great. If you want to read up on various engines go to boatdiesel.com as there is tons of info there.
I have a 52 DB located in Southport Marina. I had a leak from front windshield. I could see where the caulk was separating in spots. Zimmerman Marine located at Southport Marina did a spot treatment replacing caulk in various spots. Fixed problem and they blended it all together pretty well. I...
Thanks for replies. I haven't checked site in a while but was able to get fixed. We had to remove refrigerator to look behind the freezer. Once we did that we discovered that the drain hose for the freezer pan that goes into bilge below was keeping it from moving all the way out. Cut that and...
I am trying to remove freezer to replace icemaker line that leaks on my 2006 52" Sedan Bridge. I'm able to get 1/2 way out and then just can't get it to budge from there. Just looking for tips on getting out. Thanks.
Haven't touched it yet. I need to get someone to take a look at fixing for me. I don't have the time. Just going to live with it for a while. I will post solution when I do.
n