Recent content by nextelbuddy

i have a 96 sea ray 210 an i have seen pictures online of all the other 96-99 210/220/230 seem to have their factory bimini tops mounted onto the actual frame of the windshield with metal mounts. on mine i have the factory bimini top but mine mounts to the actual fiberglass CAP area next to the...

thank you so much for the responsiveness. I feel a lot more comfortable going forward with the install

Did your bronze transducer come with a rubber washer for installation? I was reading the instructions and they mentioned a rubber washer but I wasn't sure if that was only for the plastic p19 version or if the bronze version also was supposed to have one.

It's about an inch in diameter and the new one is 2 in in diameter. I've already bought a hole Saw 2 in so I'm prepared to make the whole larger. There's definitely some water intrusion, the transducer came out pretty easily with a couple light taps and the wood shows water intrusion and was...

Here Is a picture of the new one next to the old one

I ordered the transducer and I got it and I'm ready to install it I go to remove the collar on my old transducer and my existing transducer is significantly smaller it looks like it's one inch diameter compared to the 2 in Air Mar one. So it looks like I got the wrong one do I need to drill the...

That's a really cool looking grill never seen that before I assume something like that would not work on a standard 210 bow rider? How does it attach specifically

Thanks so much for confirming that that helps a lot. So I had a plastic version and a bronze version saved in my Amazon cart from last year I was about to click the buy now on the bronze version for $173 but I took another close look at the one I had saved and I don't think this one's going to...

Thank you very much yeah I took a look at that using your link but it looks like they don't offer the black face gauge anymore. And unfortunately they don't list any details for the transducer like what size it is etc.

So my engine is currently out and being rebuilt. I'm doing a lot of ticky tack things while the engine is out. Cleaning up the bilge etc.. My depth finder has never worked And I've done quite a bit of research since last year finding out that there's not really a Good way to fix it so it's...

i too have a 96 210 bowrider. so nice to meet you1 i emailed Swimplatform but they took for ever to email back but they finalyl did. here is the email with the pricing they sent. and they also sent PDFs with pictures. i can attach the pictures here.

I'd like to replace the entire gauge set with a newer set with white faces instead of the black faces they currently have. Anyone know what size the gauges are?

I have a four barrel Rochester car with the manual choke on my 5.7. if the engine has been run within the last day or so it will usually fire right up on the first or second crank. If the engine has been cold and sitting for a week then it will not start for me unless I pull the manual choke...

Thank you very much yeah that totally makes sense I'm going to look for those two cut wires I saw under the dash in the - harness and see if they match up to the brown and purple wires that come on those buzzers. It makes a lot of sense because that buzzer looks like it's not even secured it's...

I got this boat about 3 months ago I've been under the dash I've pulled the dash apart....and there are 2 wires that appear to be cut and loose. A brown wire and some other wire and under the dash in the main dash harness that goes towards the starboard side I do see an orange wire that has a...