Recent content by mtneer

  1. M

    Identify part

    Hi guys, I was hoping you could identify a part (missing part) for me? boat 2006 300 Sundance on a recent trip I noticed that this had fallen off (it was lose and must have Jared off from bouncing) it’s a starboard aide “vent cover”
  2. M

    350 mag low water pressure and leak

    Hi guys, sorry for the very late reply when I took the boat back to Chicago one of the starters would not work. After a 3 week turnaround at the shop I got the boat back last weekend. Evidently there must have been a leak coming from a gasket around the starter because it's now running fine...
  3. M

    350 mag low water pressure and leak

    Hi, I have 2006 350 mags paired with bravo 3 on my sea ray 300 today on a trip from FT lauderdale to the keys I noticed a few things once we cleared Miami and was able to get up to speed 1) starboard engine was burning a lot more gas. It was at 70% left in tank compared to 90% for my port 2)...
  4. M

    06 sundancer 300 head issue

    Ok! I think I got it (hate writing that "out loud"). before going out to get bellows I wanted to see if I could hear a leak (which I couldn't) so I decided to check the tank The tank was bone dry (good for me working on it) so I filled it with some water and then ran the pump until the...
  5. M

    06 sundancer 300 head issue

    thanks! I replaced the duckbill valves today (tough to find the 2"). However, I still have no suction. Background: this is an 06' but relatively new to us. Over Christmas when we were using the head worked fine until I replaced the toilet seat. I know this doesn't have anything to with...
  6. M

    06 sundancer 300 head issue

    Hi, I have an 06 sundancer 300. The vauflush head will not generate any suction. The pump works and I have stuck my hand down it (yuk) looking for blockage and nothing. It will fill up with water but there is no suction when I flush it. Any ideas? thanks mark
  7. M

    Sea Ray 300 outlet issue

    Hi, I have a 2006 300 sundancer. yesterday and today I was putting in a new (vinyl) floor and was using my jig saw plugged into the 120v outlet above the galley on the port side. everything worked fine for a while and then neither the outlet nor the refrigerator (under it) would work using AC...
  8. M

    Mercury Vessel View lost data on port engine

    Hi, I have a new to me Sea Ray SunDancer 300 with Mercury 350 mags. This boat is new to me. We picked it up on Monday from Port Charlotte FL and ran it across the state through the Okeechobee way. The boat ran GREAT until: On day 2 of the trip I ran aground in the St. Lucie River. Boat US...
  9. M

    3100 sundancer info?

    thank you all for the replies! very helpful! thanks, mark
  10. M

    3100 sundancer info?

    hi guys, I'm looking at a 2008 310 sundancer. The boat is 8 hours away, so I was looking for some advice first. Has anyone overnighted on this boat? I'm curious as if my wife and I could fit in the V-berth bed (I'm 5'4 and she's 5'2) and the kids (11 and 6) in the aft cabin. It looks like...
Back
Top