I ordered a replacement sprayer for my '09, so I am not sure if the OEM will be the same. The manufacturer for the '09 280 is ITC. The part number was Model is 97800-17NI (Brushed Nickel). You can contact their customer service department at customerservice@itc-us.com or call Monday-Friday, 8-5...
Work is moving our family of 5 from Virginia to NYC. Selling our house, our cars, and all of our possessions...but the boat. Need some advice. 1) We will be living in Manhattan, so considering Liberty Landing, thoughts? 2) Probably shipping our 2009 280DA up, but looking to upgrade to a...
From your description, you may not need to replace the welting, just attach new zippers. The zipper with broken teeth is just sewn to the welting, it is not one piece.
Sent from my iPhone using Tapatalk
They unhooked the batteries for transit. You can manually release the arm or you can hook up a 12v power source to the eim or a 12v socket and then use the power lift.
Sent from my iPhone using Tapatalk
I haven't tried the starboard side yet, but like the idea of removing the compass (let me know if it provides access). For the port side, I would try Tonka's screw trick. I attached a string to mine to retrieve it if it went to far and that didn't work. Luckily we could apply pressure when...
You should be able to replace the outermost top slide with the door on. It's a bit tricky, but it can be done.
Sent from my iPhone using Tapatalk - now Free
What "charger meter" are you referring to? If you are looking at the shore power meter and it shows 120v and your fridge AC switch is on, it will be taking power from the AC side and not draining your batteries. Though, if the A/C convertor is off, you will still not be charging your...
When changing the thermostat you need to make sure both gaskets are set correctly. I have had a bit of trouble with the upper one. I also run my engines without a thermostat in place for a couple minutes to help clear everything out before installing the new one.
Sent from my iPhone using...
When changing the thermostat you need to make sure both gaskets are set correctly. I have had a bit of trouble with the upper one. I also run my engines without a thermostat in place for a couple minutes to help clear everything out before installing the new one.
Sent from my iPhone using...