Recent content by Mike Motor

Thanks Cocktail Time. I'll check the 12v at that AGC splitter and double-check the coax. Meanwhile, my kids are busy streaming NetFlix on the TV's using their iPhones, so getting digital channels seems to be less important, but I'll get it figured out eventually.

Thanks, Jimmy. I checked that spot this weekend and it has a block-off plate in that location. Which confirms what Cocktail Time has just said about the newer AGC model that I have on my boat. I'll check the 12v at that AGC splitter and double-check the coax. Meanwhile, my kids are busy...

Jimmy, where is the Glomex Gain adjustment panel on your boat? I have a 2002 340 Amberjack and can only find the antenna splitter block (it says Glomex auto gain adjust on it, so maybe I don't have the panel that you have?) and it's mounted behind the TV itself. My glomex worked last season...

If you don't have luck with Taylor, Flounder Pounder Marine sells the 9030 windshield insert profiles...

Hello All, New to the forum and have a great solution to the aft button panel conundrum - see attached, it's a 3/4 x 3/4 piece of starboard, shaped and drilled to affix using longer screws to same holes at the top of that switch panel. Does the trick!

Thank you, See Ray!

Sea Ray - Where did you find the 3-1/2 wide stripe and the 3/4 Silver? I need a few feet of 3-1/2 Black and 3/4 Gold. Thanks