Recent content by Mercury049

Where is a 90 amp fuse? I see a big fuse on top of block but I thought it was a 50

I'll try this tomorrow when I get back there.

To be clear, when I turn the key over, the engine cranks and keeps trying to start, but I've verified there's no spark. When I bypass the key and just use the remote start, she fires right up. So I know it's something in the ignition circuit preventing spark.

When I replaced the ignition switch, I thought I had the wires in the same spots as the old one, does it not look right?

The remote start buttong/switch is connected directly to the starter, one on the main power and one on the starter wire.

Here's a picture of the back of my ignition switch, I believe it's wired correctly.

Also, I've verified the safety switch under the throttle is working. I've also verified the shift safety switch is working correctly. I've also replaced the slave solonoid.

I've been working on this problem for days. Bottom line is I have replaced the ignition module, distributor, spark plugs, spark plug wires, ignition coil and starter. When I hook up a remote starting switch to the starter, and have the key switch to the on position, the boat starts instantly and...